Enter forum description here ...
+1

Panel Locked Pin

Pavlos Laskas 3 years ago updated by Ricardo Pinto | visiontech pt 3 years ago 11

Hello,

I used a pin code to lock access to a theme panel, but when I press the X at the upper right corner I still have access to the panel.

All version are the latest, I tried it with Android and Windows Client. I also tried it in a different server. The result is the same

+1
Under review

Weather data no longer provided

Andrew Watson 3 years ago in bOS Server updated 3 years ago 2

I have a Jigsaw server. The weather data is no longer being provided - all data is zero. This server has been operating correctly for a number of years and the weather data was displayed yesterday. No config changes have been made. The Jigsaw has been restarted. The DNS is correctly resolved by 8.8.8.8 and nslookup from the SSH shell returns the correct IP addresses for www.comfortclick.com and the weather data source, The location code is correct and I have re-checked this. It would appear that the Comfort Click bridge server / api is returning all zeroes. The behaviour is the same on my Windows one user test server.

Can you please investigate and resolve?


Thanks

Andy

+1
Under review

Is it possible to connect 2 communication standards at the same time: Bacnet/IP and Modbus TCP/IP on bOS?

nguyen nguyen 3 years ago in General updated by ComfortClick Support 3 years ago 1

Hi Ad,
Currently I am connecting Bos to device A via Modbus TCP.

Now that same bOS, I want to simultaneously connect device A through TCP/IP modbus and connect to device B through BacNet IP?

Please give me solution about this configuration, is this possible? and can you give me an example of this.

Thanks & Best Regards.

+1

How to reset Counter log by interrupt signal?

nguyen nguyen 4 years ago updated by Jürgen Jürgenson 4 years ago 1

Dear ad,

I am wanting to reset the Counter Log automatically, for example by an interrupt signal, or a preset time.

Please give me some ways to solve it?

Thanks & Best Regards

+1

How to connect SUPREMA access control device data to bOS?

nguyen nguyen 4 years ago 0

Hello,

I have a SUPREMA access control device and an IDTECK access control device.

The device has SDK/API support for connecting to third parties.

I want to get data from these devices to the boS.

I don't know how to connect them to bOS, please guide me to connect them to bOS.

Thanks very much.

+1
Under review

Cannot program KNX with Jigsaw and ETS 6

Kristián Vojčík 4 years ago in Devices / KNX updated by Joaquim Matos 3 years ago 22

Hello.

I having big trouble to programming KNX over Jigsaw with ETS 6 when I test for bus it return error but I can see data on bus with diagnostic but wehn I try to program something I got error Connection closed by remote device. Have anybody similar behaviour?

+1

Idea for comment line into a program

Gruyère Energie SA 4 years ago in bOS Configurator / Tasks updated 4 years ago 2

I think that to have the possibility of comment a line or section and add comments into a program might be really good. For development of task for example or other reasons.


+1

iOS Client not connecting via Local Address (Manual setup; Public Address OK)

Dieter Kraewinkels 4 years ago in bOS Client updated 4 years ago 2

Hi,

When on wifi, the iOS Client is not connecting anymore to the "Local Address" (http & https).

Configuration is "Manual".

-> When on 4G, the app is connecting successfully via the "Public Address" (http).

-> When on wifi, I can successfully browse to the IP address set in the "Local Address" (http & https).

The issue started 2-3 days ago...


Below some extra info :

  • iOS App version : 4.8.3
  • iPhone 13 Pro / iOS 15.1.1
  • iPhone 11 Pro / iOS 15.0.2
  • Server version : 4.8.20

Already restarted the server...

Any suggestion ? Something I can test ?

Thank you

+1

Mi tableta de control no funciona

Antonio Emilio Martinez Robled 4 years ago in bOS Client updated by Toni Cuello 4 years ago 1

Buenas a todos.


Tengo un serio problema con mi tableta de control del BOS cliente. Directamente no se conecta, (llevo así un año). Emite  error de conexión continuado. la he reiniciado y tampoco se soluciona. En cambio la aplicación móvil y desde el PC si que funcionan. la empresa que me instaló la domótica en casa "pasa de mi". Qué puedo hacer?

+1
Under review

confirmation dialog - formatting of text

Bert Porter 4 years ago in bOS Configurator / Themes updated by Daryl Lim Ming Yen 7 months ago 7

Is it possible to customize the formatting of text in a Confirmation Dialog Box? Is it possible to customize the size of the Confirmation Dialog Box? 

It is good feature - especially the ability to add a pin code.

 

But its presentation could be better. See my screen shot.

Thank you.

Confirmation Dialog Box.png