Hi dears,, 

I have an important question,, so plz help to answer it,, 

I have hotel project,, the owner needs to know if the rooms are (occupied / empty) as a simple solution, using a KNX 4 binary input modules,,

so my question is can i integrate these knx modules with jigsaw, to read/know each room status as (occupied /empty)?? 

Note: in this KNX system,  I will use KNX Power Supply and KNX 4 binary input modules.. 

Regards,, 

Aladdin Sultan 

I have some some dimming lights (controlled buy dali gateway), they are programmed in ETS and working fine.

Now i'm trying to control theme with comfort click without succes.

I have the following adresses:

3/4/0 switch (switch)

3/4/1 dimming (dimming control)

3/4/2 value (percentage 0-100%)

3/4/3 status (switch)

I used in comfort click the following adress:

Address: 3/4/0 switch

status address: 3/4/2

resutl:

the slide goes directly back to 0

the light does nothing 

Hi, I have the system ABB for Hotel access control

The system ABB used two group address and they are proprietary telegrams

If the composition is known is possible to read the telegram?

Do you have one exemple?

Best regard

Giordano

Hi, 

When I import the .esf file in bOS Configurator I get the error "Error importing EIB devices from .esf" I use ETS5, I tried with very simple knx program.

Hello,

I'm getting many "error connecting to KNX device".

On my first system (Grinder), this is happening from times to times, for a very short period of time (<1 min). 

This is not impacting the good operation of the system, except if this happening when bOS needs to issue a KNX command, but that's very rare, and then I noticed an impact only once.

I thought that maybe this was linked to my IP network that needed some troubleshooting.

But I've got another system, a KNX Jigsaw, for which the KNX error connecting to device is occurring every 2 minutes ! The KNX interface being incorporated into the Jigsaw, this can't be an issue with my environment. 

I'm not using KNX on this Jigsaw, so I just disables the KNX interface, and problem was fixed for me. 

Still I would like to understand how to fix these "error connecting to device" incidents. 

I'm also getting them from times to times for all IP-connected devices: global Caché, Philips Hue, Denon amplifier, etc... 

Thanks,

François 

I am facing a problem cause its the first time I am using Sledgehammer Server . The problem is that via bos Configurator I select the IP/interface automaticlly after searching but when I am trying to just turn on /off a light I am getting an error message saying that device is not connected. I am testing the same channel with USB / knx interface and its working Any help?

We have created allready Scenes in ETS and what I would like to know is how I am going to just call each scene? The scenes Group addreses are allready imported in bOS configurator. Also I would like to create some time tasks, To turn On and Off specific lights which I will  select in specific hours every day. Is it possible and how?

Thank you

Hello, what I need to do is to create for a Hotel 3 buttons for each room. One for Do not disturb , one for Make Up my Room and one for Room Service. I have allready created the tasks. and connected in each room. These messages will appers in Reception's central P.C. which will running bOS client. When reception see the message for each room will have the possibility to send fixed answers to each room and a confirmation that received the customer's message . I forgot to say that each room will have an Android Tablet to send the commands to the system. Is it possible to make something like this? Also inside the room we have install 3 push buttons that customer can press and select one of the 3 choices above.

Thank you in advance 

Hello. I have imported from ETS4 all group adresses including status for on/off functions, staus for % dimming and status for % shutters possition.

I want to create push buttons with bos Configurator for example on/off push button that will have always status of the lamp to know when a light is on or off. How I am going to do that?

Hello,

I tried importing KNX Group Address of 'Scene' which is 0/0/3 1 Byte Scene Control but it is not visible in the ComfortClick project. 

Steps followed were as follows:

1. Import KNX Group Addresses from XML file.

2. Define Datapoint type.

3. Select "Next".

4. I get the status as 'Imported Selected Tags'

5. While defining Template, that tag is not visible.