Vent commands.pdf

Dear all.
Im facing a problem regarding the Fan configuratios and command as per attached PDF file.
Can you please help me ?

On the bOS log:

Users : 14/04/2025 17:44:01 : User : SetValue : Object: Devices\KNX\Ground floor\ISE + FA + H2O\AEF-1-GF RUN, Name: Value, Value: False

But the on the KNX is not present 

Thanks

Please see the pdf attached

Goodmorning

Is it possible to restart communication for example with KNX devices by writing with a program directly on the communication point?

KNX disconnect two times a minute. Any ideas what could be wrong ? 5 years was no problem, with last update 4.11.8 problem started.

Hi everyone,

I have some strange behaviour of my vizualization. Over last months I have set up my vizu and it was working now for couple of months without any issues. Now, I am on my first my first vacation abroad since i have it ready and of course from time to time I am checking the situation of my house in my vizu. Mostly because I can rather than I need to 😉

Anyway, today on my third day of vacation all of a sudden I receive non-stop error messages when I am entering the vizu...first time that this happens and of course exactly then when I am not home.

The message is: Error connecting to device. Write: negative confirmation received from telegram. I also attach a screenshot. And directly after such a message it says that it is again connected.

I could also wait until I am back home from vacation to restart wlan/server etc, but I hope the one or the other might understand me that this keeps me restless that I cant access it right now. I have simply no idea why I get this messages non stop and also I can not click any buttons or similar. I did not change anything since I left home, which makes me think that it somehow connected to my internet router at home. The strange thing however is that I still receive data concerning temperature, brightness level etc. Also I still get video connection from my IPC cameras that are connected to the same network as my jigsaw server.

Does anyone have an idea whats going on? Maybe I need to restart my jigsaw server?

Would appreciate any thoughts/ideas on that issue.

Cheers, Robert

Hello,

I am trying to set the AC to turn off if the read temperature is equal to the set temperature. Do I have to use the thermostat task? and should I set the type? Thank you. 

Sometimes work, sometimes don't . KNX Connected become False, and we get that " 

Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value) " before starting "No Ack"

Devices : 10/30/2024 9:51:09 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:51:04 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:46:37 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:46:32 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:45:40 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:45:35 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:43:24 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:43:19 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:43:16 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:43:11 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:39:07 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:39:02 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:35:38 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:35:33 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:34:58 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:34:49 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:34:30 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:34:25 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:32:46 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:32:41 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:32:38 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:32:33 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:31:42 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:31:38 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:31:34 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:31:28 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:31:25 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:31:20 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:31:17 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:31:12 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:30:37 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:30:32 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:30:05 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:30:00 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:29:49 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:29:44 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:27:32 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:27:27 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:25:56 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:25:51 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:24:52 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:24:47 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:24:19 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:24:14 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:24:03 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:23:58 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:23:55 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:23:50 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:23:39 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:23:34 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:22:43 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:22:41 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:22:43 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:22:41 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:19:55 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:19:50 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:19:39 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:19:34 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:17:43 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:17:38 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:17:02 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:16:57 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:16:30 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:16:25 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:16:06 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:16:01 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:14:54 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:14:49 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:14:38 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:14:33 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:14:18 AM : Event : Devices\ElectroalfaCM : Device is connected.

Devices : 10/30/2024 9:14:16 AM : Error : Devices\ElectroalfaCM \PROGRAME DIMARE HALA E3 (Rezolvat)\PROGRAM HALA E3 ZONA E\HALA E3 ZONA E : Error setting value. Devices\ElectroalfaCM \Hala E 3\Hala E3\Value Hala E3 ZONA E.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 9:14:16 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA E1 Galvanizare (Rezolvat)\PROGRAM HALA E1 GALVANIZARE D\HALA E1 GALVANIZARE D : Error setting value. Devices\ElectroalfaCM \Hala E 1\Hala E1 productie Galvanizare\VALOARE SENZOR D.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 9:14:16 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C1 ZONA E\HALA C1 ZONA E : Error setting value. Devices\ElectroalfaCM \HALE C\HALA C1\Value Hala C1 ZONA E.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 9:14:15 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C2 ZONA D (nu s-au luat datele)\HALA C2 ZONA D : Error setting value. Devices\ElectroalfaCM \HALE C\HALA C2\Value Hala C2 ZONA D.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 9:14:15 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA E1 Galvanizare (Rezolvat)\PROGRAM HALA E1 GALVANIZARE C\HALA E1 GALVANIZARE C : Error setting value. Devices\ElectroalfaCM \Hala E 1\Hala E1 productie Galvanizare\VALOARE SENZOR C.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 9:14:15 AM : Error : Devices\ElectroalfaCM : Error connecting to device. Failed to send message: Write to 4/3/102 with data 110.

Devices : 10/30/2024 9:12:29 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:12:24 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:10:53 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:10:48 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:08:53 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:08:47 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:07:56 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:07:51 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:07:24 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:07:19 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:05:56 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:05:51 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:05:40 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:05:37 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:05:32 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:05:27 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:03:32 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:03:27 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:02:51 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:02:46 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:02:19 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:02:14 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 9:00:49 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 9:00:44 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:56:56 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:56:51 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:53:20 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:53:15 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:50:15 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:50:10 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:47:43 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:47:38 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:44:54 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:44:53 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:44:06 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:44:01 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:43:58 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:43:53 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:42:38 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:42:33 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:41:26 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:41:21 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:41:01 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:40:56 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:40:29 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:40:24 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:39:57 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:39:52 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:38:05 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:38:00 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:35:58 AM : Event : Devices\ElectroalfaCM : Device is connected.

Devices : 10/30/2024 8:35:08 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:35:03 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:34:59 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA E1 Galvanizare (Rezolvat)\PROGRAM HALA E1 GALVANIZARE F\HALA E1 GALVANIZARE F : Error setting value. Devices\ElectroalfaCM \Hala E 1\Hala E1 productie Galvanizare\VALOARE SENZOR F.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:34:58 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA E1 Galvanizare (Rezolvat)\PROGRAM HALA E1 GALVANIZARE D\HALA E1 GALVANIZARE D : Error setting value. Devices\ElectroalfaCM \Hala E 1\Hala E1 productie Galvanizare\VALOARE SENZOR D.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:34:58 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA E1 Galvanizare (Rezolvat)\PROGRAM HALA E1 GALVANIZARE E\HALA E1 GALVANIZARE E : Error setting value. Devices\ElectroalfaCM \Hala E 1\Hala E1 productie Galvanizare\VALOARE SENZOR E.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:34:32 AM : Error : Devices\ElectroalfaCM \HALA E 4\Prezenta senzori DEZVOLTARE / LABORATOR\Prezenta1 Zona HOL DEZ/LAB : Error converting received value. Index was outside the bounds of the array. at ComfortClick.EIB.DPT.DPTBoolean.GetReceivedValue(Byte data)

at ComfortClick.EIB.Common.EIBDataPoint.OnDataReceived(KNXReturnData retData)

Devices : 10/30/2024 8:34:12 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:34:07 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:33:10 AM : Error : Devices\ElectroalfaCM \PROGRAME DIMARE HALA E4 (Rezolvat Fara Lab/Dez)\PROGRAM HALA E4 DEZVOLTARE C\HALA E4 DEZVOLTARE C : Error setting value. Devices\ElectroalfaCM \HALA E 4\DEZVOLTARE / LABORATOR\Value ZONA DEZVOLTARE C.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:31:55 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:31:50 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:30:52 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C2 ZONA D (nu s-au luat datele)\HALA C2 ZONA D : Error setting value. Devices\ElectroalfaCM \HALE C\HALA C2\Value Hala C2 ZONA D.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:52 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C3 ZONA G\HALA C3 ZONA G : Error setting value. Devices\ElectroalfaCM \Hala E 3\Hala C3 Zona Tru punch\Value Hala C3 Tru punch ZONA G.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:52 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C2 ZONA A\HALA C2 ZONA A : Error setting value. Devices\ElectroalfaCM \HALE C\HALA C2\Value Hala C2 ZONA A.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:51 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C3 ZONA A\HALA C3 ZONA A : Error setting value. Devices\ElectroalfaCM \Hala E 3\Hala C3 Zona Tru punch\Value Hala C3 Tru punch ZONA A.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:51 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C3 ZONA E\HALA C3 ZONA E : Error setting value. Devices\ElectroalfaCM \Hala E 3\Hala C3 Zona Tru punch\Value Hala C3 Tru punch ZONA E.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:51 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C3 ZONA H\HALA C3 ZONA H : Error setting value. Devices\ElectroalfaCM \Hala E 3\Hala C3 Zona Tru punch\Value Hala C3 Tru punch ZONA H.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:51 AM : Error : Devices\ElectroalfaCM \PROGRAM DIMARE HALA C\PROGRAM HALA C3 ZONA C\HALA C3 ZONA C : Error setting value. Devices\ElectroalfaCM \Hala E 3\Hala C3 Zona Tru punch\Value Hala C3 Tru punch ZONA C.Value. Exception has been thrown by the target of an invocation. at System.RuntimeMethodHandle.InvokeMethod(Object target, Span`1& arguments, Signature sig, Boolean constructor, Boolean wrapExceptions)

at System.Reflection.RuntimePropertyInfo.SetValue(Object obj, Object value, Object index)

at BOSCommon.Node.Common.NodeHost.SetValue(String name, Object value)

at BOSCommon.References.ValueReference.set_Value(Object value)

Devices : 10/30/2024 8:30:51 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:02:02 AM : Event : General\Jigsaw : Device is connected.

Devices : 10/30/2024 8:02:02 AM : Error : Devices\ElectroalfaCM \Hala 3\Prezenta senzori Hala C3 Zona Tru punch\Prezenta1 HALA C3 Zona HE3TP ZONA C : Error converting received value. Index was outside the bounds of the array. at ComfortClick.EIB.DPT.DPTBoolean.GetReceivedValue(Byte data)

at ComfortClick.EIB.Common.EIBDataPoint.OnDataReceived(KNXReturnData retData)

Devices : 10/30/2024 8:02:02 AM : Error : Devices\ElectroalfaCM \Hala E 3\Prezenta senzori Hala C3 Zona Tru punch\Prezenta1 HALA C3 Zona HE3TP ZONA C : Error converting received value. Index was outside the bounds of the array. at ComfortClick.EIB.DPT.DPTBoolean.GetReceivedValue(Byte data)

at ComfortClick.EIB.Common.EIBDataPoint.OnDataReceived(KNXReturnData retData)

Devices : 10/30/2024 8:00:44 AM : Error : General\Jigsaw : Error connecting to device. No Ack

Devices : 10/30/2024 8:00:39 AM : Event : General\Jigsaw : Device is connected.

Hi all 

I have a time node that works and displays time in the visualisation correctly. Problem shows up when i want to send time variable to KNX address and show it on the switches, it always stays at 00:00.

Addreses are the same 0/0/1  and 0/0/3 on switches.

Im having problems with connecting to comfortclick jigsaw in ETS to program devices.

IP is correct, NAT on or off doest make a difference.

KNX IT´S NOT WOKING WITH BOS. IPS JUNG IS OK, WITH IP ADRESS OK, BUT ITS SHOWING THIS ERROR CONNECTION 37