Hi there, since latest update (4.9.23), every time my Comfortclick boots (either with an ordered shutdown/restart, or with a powerloss) I have to stop jigsaw knx server, wait few seconds, start it to make ETS work.

Am I the only affected? Any way to solve it?

Thank you

Hello,

i'm new here. i have just started building my knx installation. I want to use my jigsaw pro for visualisation.

What i've done so far, is create a simpel button that switches an output on my actuator. It all works perfect including status feedback on my button.

Then i exported my project out of ets6, and imported it in bOs configurator. Both groupadresses show up perfectly (status and switching)

now i created a template and dragged the switch button on it, but it doesn't work. i can acces the visualisation on my webbrowser perfectly, i see the button i've created, but if i click it, nothing happens.

i've tried setting the value from boolean, to switch, to undefined, .... enabled transfer, read and write under the communication tab from the groupadress .... nothing seems to fix it.

i've watched the tutorials, but they are outdated, the current popup interaces when importing ets project, are different now, i'm not able to select sertain things the do in the video

any ideas?

In the new version of bOS configurator(4.9.23) there is the option for "KNX Remote Programming", which from what I understood means that we don't need a forwarded port because we can program our KNX devices remotely only through Jigsaw normally with a provided gateway.
I have tried it many times and the problem is sometimes it works and other times it doesn't. So, my question is, is this feature on testing phases or am I configuring anything wrong. To be specific most of the times it just shows the "Disconnected" sign, like in the picture attached.

Thanks in advance.

Hello 

I do see that we have a Device 018.000 Scene Control to activate and learn KNX scenes 

I was woundering what  the best pratice would be for import this Group addresses and setup a template to call and learn them from the Interface 

Thanks for the help in advance 

I've attached the Jigsaw to my KNX installation by connecting the TP connection directly to the bus.

Seems the Jigsaw cannot start that way of communication.

On the other hand, when I try it by using the KNP IP gateway, it IS working!

So, how can I enable the Jigsaw's internal KNX TP bus connection instead of using the IP based connection?

Hello,

is it possible to change lightning scene dimming bar step from 10% to 5% or 1%?

Thanks for your help.

Kind regards.

Hello, 
is there a script to restart a knx device, directly without going through ETS?
Thanks, Marco

Hi,

Its it possibe to read group value from bOS server. :E.g: "GroupValueRead" sent from KNX network and then get response "GroupValueResponse" from bOS?

I tried to change "Read" flag to "TRUE" under Commuunication section but bOS is still not responding to "GroupValueRead"

I've seen some similar posts, but no one regarding KNX connection. I do have problems to connect through Jigsaw KNX and every few seconds I get this error. Does anyone know how can it be solved? Thank you in advance

Hello, is it possible to remotely program ets over a purchased cloud connection? or how to get it when the client doesn't have a permanent public IP address?