There are a couple of similar posts, but none really hits the nail on the head as maybe I have a different problem. BOS server version latest 4.8.14 

The situation is very simple, I want to create three variables (date, time, timestamp) in BOS, which are then mapped or given the same addresses as KNX so BOS effectively populates the KNX addresses and issues the date and time to the KNX BUS. However, there are continues issues, despite several and lengthy testing performed

Current BOS variables created

Current KNX variables created in ETS5

Time, seems to be working fine

Date, 

1. First problem, the value type, KNX 11.001, allows for the time, but the time value is actually not populated by BOS
2. Second problem, if status address is populated in the BOS variable it creates problems for BOS and the date is no longer transmitted/populated
3. Third problem, the associated KNX variable, spits errors, despite being the same value type

BOS variable

KNX variable

Errors spit in transforming

Timestamp, 

1. First problem, the time is not populated, only the hour of the time is, minutes and seconds are not populated
2. Second problem, the KNX variable is not populated, not a single field

BOS variable

KNX variable

BoS: 4.8.14

KNX data point value

Counter log pointed to KNX data point value above

Why does the counter log only records the partial values and graphically displays the partial values as opposed to the real value of the KNX data point?

Hello.

I am trying to solve issue where I have KNX bus behind NAT with static public IP and forwarding is working, but UDP protocol is blocked by provider. (I called the provider, they told me there is nothing they can do, I know is stupid, so here we go) So I standing in front of issue that I cannot connect to KNX bus because is only over UDP port. Is here anybody who already solve this issue and is willing share the solution?

PS.: On site Jigsaw is not an option because is only two thermostat that controll two rooms. Time to time disconnection is acceptable because of NAT connection.

Hello, I'm trying to re-import KNX data from an updated ETS export file (XML), but always getting the same error:

What could be the problem?

Regards.

Hi To Alll

im trying to create a simple knx thermostat with the setpoint up and down, and i unable to find the optimal solution, also im trying to display the room temperature and when you press the up or down button to display the setpoint.

im using bosconfig 4.8.5.

Thanks in advance

Hello, does anyone know why the 3671 port doesn't work anymore on Bos controller even if there is a port forwarding? I need this for remote programming my KNX installation. It was working good so far since know. Also when the Bos configurator inform me  that i need to update my controller when the window prompt me to, there is no update available.  

Thanks in advance.

Dimitris

Dear Sir,

Greetings.

We've just receive the comfort click server yesterday and we've made our test , kindly be informed that we've found a problem such as the following points :-

1- We've create an account on comfort click .

2- We download B0S configuration and B0S server and B0S client.

3- Make configuration and link group address with buttons according to ETS project.

4- When we make check from mobile application or laptop not give any output to the relay.

5- Make full download to relay by using comfort click server.

I'll be waiting for your urgent reply as this project top top urgent.

Best Regards,

Hussien.

Hi all, 

I'm facing some issues with downloading my components with ETS5 and generate the ETS export file to import afterwards in bOS. 

In bOS the Jigsaw KNX is std. CCJigsaw 0.0.1.

When I try to connect in ETS5 with CCJigsaw 192.168.1.16:3671 to Individual Address 0.0.1 for downloading my components I get the error: "The individual address is already in use by another device."

I was not able to add the Comfortclick in my topology.

Someone who can assist my with this?

Should I connect with USB directly to the module instead of connecting over wifi?

Hi there,

I'm trying something simple but seem to miss something.

I wan't to read the operating time from the ECG's in the dali gateway.

I gave the operating time there own knx adres but I can't read the values in bos ??

Hello,

I have create some programs that will send values for dimming during time. I have created 4 different programs with 4 different time and different values for dimming. I want this to make this visible to the user so he can change the time and the sending value as he wish. How I am going to create this so everytime he will be able to chane the time and the sending value?

Thank you in advance