Anyone no how connect a solar inverter kostal with confortclick?

It have a rs485 port but no communication with confortclick. 

Can anyone help

Thanks

Hi,

I've upgraded to bOS v4.5.0 and noticed the old way for RPC doesn't work any more.

The change log of v4.5.0 says there is a new RPC with authentication but cant find any manual about it.

Any body know's how this new RPC works?

More then half of my installation works by the RPC interface and currently nothing works and need to downgrade back to V4.4.4

Hello,

is it possible to save users' activity in a log file? 

In a form like Date-Time-Action?

I'm using sledgehammer server and i want to do it in a Hotel KNX installation. 

Thank you,

Charis Meidanis

Hello,

I'm trying to test out the new Fibaro HC2 integration. However after adding the IP address, my username and password, bOS server is unable to stay connected to the HC2. It only connects for a split second after every 30 seconds or so.

At the same time I can control devices on the HC2 from bOS without any issues using the Fibaro http API.

Devices : 3.06.2019 10:52:33 : Error : Devices\Fibaro : Error connecting to device.
Devices : 3.06.2019 10:52:33 : Error : Devices\Fibaro : Error: Object reference not set to an instance of an object. at ComfortClick.Fibaro.Driver.FibaroDriver.CreateDevice(JToken device)
at ComfortClick.Fibaro.Driver.FibaroDriver.OnSent(HttpQueueItem item)
at BOSCommon.Drivers.SendQueue.HttpQueueItem.OnSent()
at BOSCommon.Drivers.Common.DriverBase.Write(QueueItem item)
Devices : 3.06.2019 10:52:32 : Event : Devices\Fibaro : Device is connected.
Devices : 3.06.2019 10:52:02 : Error : Devices\Fibaro : Error connecting to device.
Devices : 3.06.2019 10:52:02 : Error : Devices\Fibaro : Error: Object reference not set to an instance of an object. at ComfortClick.Fibaro.Driver.FibaroDriver.CreateDevice(JToken device)
at ComfortClick.Fibaro.Driver.FibaroDriver.OnSent(HttpQueueItem item)
at BOSCommon.Drivers.SendQueue.HttpQueueItem.OnSent()
at BOSCommon.Drivers.Common.DriverBase.Write(QueueItem item)
Devices : 3.06.2019 10:52:01 : Event : Devices\Fibaro : Device is connected.
Devices : 3.06.2019 10:51:31 : Error : Devices\Fibaro : Error connecting to device.

Hi

I am trying to configure a zipato z-wave remote to my controller. 

Device discovery seem to show the various functions; basic, battery, emergency. 

However the configuration parameters are missing, and if I try to add the set described by the manufacturer, by using the add functionality in the parameter menu. The values are not save correctly to the device using set. (no error is given) . Using Get, after  the set, the parameter seem to be reset to the "default" value.

To be able to use the remote, I need to change the output values for each association group (82-89), to be able to recognize the different buttons pressed from bOS. 

Have anyone made this remote work with bOS? If so how did you set the parameters? 

Any tips on adding devices where bOS does not download the parameter set?

Thanks

Has anyone had any luck in configuring these door windows sensors?

https://szneo.com/en/products/index.php?id=42

I have added them via the inclusion button in bOS configurator (jigsaw with z-wave dongle). They start configuration when I follow the instructions but ends up as "NotConfigured"

Associations are also blank. No values are read.

Hey,

Has anyone messed with Goodwe solar power inverters or Ezloggers Pro?

I'm trying to display solar power information in our tablets.
Goodwe uses a cloud based service for monitoring.
I found some API info from here http://euapi.sems.com.cn:82/swagger/ui/index#/ but so far I have no luck getting info from the API for my devices. There is a good chance i'm doing something wrong as i've not used API's with bOS that much.

Option 2 is to use modbus, it should be easier at least for me - i'm still waiting for modbus register table info from their support.

Hello there,

I'm on the latest Beta, I'm getting an issue since installing with a Modbus device, it's an I/O module but this only applies to the Digital Outputs which operate by setting the corresponding bit for the digital output.

However, despite the program I use giving out the correct value for the outputs I want on, the Uint16 register only changes for a short time and reverts back to the previous value, and doesn't change the device state? on occasions it does work making it all the more confusing, it's almost as if it's reading back the value from the Modbus device? even with "read Cyclically" off.

It wasn't happening before I upgraded, and to make it even more confusing it's not happening on two other similar devices!?

Any ideas?

Hello friends!

I am a beginner with the Comfortclick and I have a simple question about the status of the devices. Where can I configure the status? I just found the parameter value.

The same thing happened to me with other kind of devices like temperature setpoints, shades, and more things...

Thanks a lot!

Haritz

I can not connect comfortclick to google home? 

IWhen I add a comfortclick to my google devices, it happens that the connection was not successful.

How can I solve this?
What is this about?

With best regards