i have MCOHOME zwave thermostat, and i have 2 different models i try to add it in BOS after adding i didn't get fan speed control except on that others are ok. 

please help.

Dear Sir,

Greetings.

We've just receive the comfort click server yesterday and we've made our test , kindly be informed that we've found a problem such as the following points :-

1- We've create an account on comfort click .

2- We download B0S configuration and B0S server and B0S client.

3- Make configuration and link group address with buttons according to ETS project.

4- When we make check from mobile application or laptop not give any output to the relay.

5- Make full download to relay by using comfort click server.

I'll be waiting for your urgent reply as this project top top urgent.

Best Regards,

Hussien.

Is there possibility to set the notification stream of changes happening on particular subtree in Devices tree?
The use case I got is integration with Apple HomeKit using homebridge software. Basically homebridge is using REST API of bOS to control devices, but the feedback it is getting is made using the poll-behavior: it continuously request bOS to refresh the status of each device. Would be much more effective if the bOS could push the notification over HTTP to homebridge on any change. I potentially could make a HTTP device which will be triggered on change, but this is like lots of configuration to be done as each state has to be added separately.

Witam, jak zrobić przebudowę sieci z-wave aby inne sensory obrały inną drogę komunikacji przez repitery 

Hello!
I added a zipato rfid keypad to colibri. I can't find a setting for using USER_CODE_SET command.
the device is: http://manuals-backend.z-wave.info/make.php?lang=en&sku=ZIPERFID

Can you give me a solution?
Thanks

Hi all, 

I'm facing some issues with downloading my components with ETS5 and generate the ETS export file to import afterwards in bOS. 

In bOS the Jigsaw KNX is std. CCJigsaw 0.0.1.

When I try to connect in ETS5 with CCJigsaw 192.168.1.16:3671 to Individual Address 0.0.1 for downloading my components I get the error: "The individual address is already in use by another device."

I was not able to add the Comfortclick in my topology.

Someone who can assist my with this?

Should I connect with USB directly to the module instead of connecting over wifi?

Hi there,

I'm trying something simple but seem to miss something.

I wan't to read the operating time from the ECG's in the dali gateway.

I gave the operating time there own knx adres but I can't read the values in bos ??

Are Hue motions sensors supported within the HUE integration? 

I'm looking to detect a motion trigger and control my non-HUE lights with a Program-integration. 

Is this possible? 

Hey,

I'm wondering if there is a better way - Komfovent AHU sends its time and date values in 8x2int where MSB is hour value and LSB is the minute value.
I couldnt get the correct values with the options bOS has, so i turned to math... but i feel like the programs i made may be incorrect.

First i divided the 16bit unsigned value with 256 to get the MSB first. Then i basically subtracted the MSB value i got from the MSB Int value and multiply that again with 256. 

As i need to make a visu for the scheduler then it feels like a lot of trouble separating the values. Any better solutions?

Best regards,

Jürgen

I have a Fibaro Button which uses the Z-Wave command class Central Scene function to report one or more button presses. I have included the device and associated with the controller node successfully. Central Scene provides a KeyAttributes value which changes in response to multiple button presses. However, I have not been able to find a simple way to use the value - it does not appear in the usual dialogues for using a value, presumably because it is not a boolean, integer or double and there are no templates and I can't create one. My workaround is a program task which triggers on any change of the KeyAttributes value - I then have to use an "if" statement for each possible attribute value to set an integer variable. This seems to be a really complex way to be able to use the value - is there a better solution? I also have the same issues with the BOsEnum type which also lacks templates and value support etc.

Configuration Jigsaw, latest BOs, Aeotec USB Gen5