Hi Gents,

Anyone had any experience with this:

HSM02 - Wireless Mini Door/Window Contact Detector

Can not include it on my network, following the instructions (as far as I can understand them) it says take the battery lid off and move magnet away and it should be in inclusion mode, which it seems to be but i'm getting nothing from my Zwave dongle?

Any help would be greatly appreciated.

Cheers

hallo.

i've an alarm station (BENTEL ABSOLUTE 42 ) i'll like to interface with boss.

The station has an ip module and i can switch on and off areas, alarm and have access to log and events using their app ( absolute app for iOS or android).

i receive mail notifications and phone calls from events .

Bentel support told me that the common interface for their products is ITV2 protocol.

is there something for connecting with boss?

thanks

ragards

This is what I'm trying to achieve:

I successfully can control my TV from Firefox POST plugin with following URL, Headers and payload:

POST URL: http://192.168.155.105:55000/nrc/control_0/

HEADERS:

Content-Type: text/xml;charset="utf-8"

PAYLOAD (data):

I'm able to MUTE and UNMUTE my TV, and I have also tested following commands which also works:

"NRC_CH_DOWN-ONOFF", // channel down
"NRC_CH_UP-ONOFF", // channel up
"NRC_VOLUP-ONOFF", // volume up
"NRC_VOLDOWN-ONOFF", // volume down
"NRC_MUTE-ONOFF", // mute
"NRC_TV-ONOFF", // TV
"NRC_CHG_INPUT-ONOFF", // AV,
"NRC_RED-ONOFF", // red
"NRC_GREEN-ONOFF", // green
"NRC_YELLOW-ONOFF", // yellow
"NRC_BLUE-ONOFF", // blue
"NRC_VTOOLS-ONOFF", // VIERA tools
"NRC_CANCEL-ONOFF", // Cancel / Exit
"NRC_SUBMENU-ONOFF", // Option
"NRC_RETURN-ONOFF", // Return
"NRC_ENTER-ONOFF", // Control Center click / enter
"NRC_RIGHT-ONOFF", // Control RIGHT
"NRC_LEFT-ONOFF", // Control LEFT
"NRC_UP-ONOFF", // Control UP
"NRC_DOWN-ONOFF", // Control DOWN
"NRC_3D-ONOFF", // 3D button
"NRC_SD_CARD-ONOFF", // SD-card
"NRC_DISP_MODE-ONOFF", // Display mode / Aspect ratio
"NRC_MENU-ONOFF", // Menu
"NRC_INTERNET-ONOFF", // VIERA connect
"NRC_VIERA_LINK-ONOFF", // VIERA link
"NRC_EPG-ONOFF", // Guide / EPG
"NRC_TEXT-ONOFF", // Text / TTV
"NRC_STTL-ONOFF", // STTL / Subtitles
"NRC_INFO-ONOFF", // info
"NRC_INDEX-ONOFF", // TTV index
"NRC_HOLD-ONOFF", // TTV hold / image freeze
"NRC_R_TUNE-ONOFF", // Last view
"NRC_POWER-ONOFF", // Power off

"NRC_D1-ONOFF",

"NRC_D2-ONOFF",

"NRC_D3-ONOFF",

"NRC_D4-ONOFF",

"NRC_D5-ONOFF",
"NRC_D6-ONOFF",

"NRC_D7-ONOFF",

"NRC_D8-ONOFF",

"NRC_D9-ONOFF",

"NRC_D0-ONOFF",

Now to my question, how to format this in bOS?

I have created a Basic HTTP device:

And created one command as follows:

When try to call this command I get this error message in the log:

Error running Send.. Exception has been thrown by the target of an invocation.. BOSCommon.Exceptions.NodeException: Exception of type BOSCommon.Exceptions.NodeException was thrown.

What is wrong?

Hello good afternoon!

Hi, I can send a command to a serial device successfully. My question is where does the received data go? I have a temperature sensor that is connected with a serial connector. I can send the request and I see the temperate in the debug window in comfort click (in hex format). How can I store this data in a value in comfort click to output that info in the client? Is this possible?

Hi,

I'm using a modbus devices (light,dimmer,ect) with moxa RTUtoTCP converter, the connection is instable and every time give me the message "Error connecting to device", after few second "Device is connected" but if try to change state I get message "Error setting value .... device is not connect ..." After few second the state change anyway but the interaction is very very slow

Any suggestion please?

Thanks a lot

Android Tasker can start execute an action when you turn off your alarm (e.g. with sleep as android). The action can be an html request to another machine.

Is there a way to trigger a task in bOS server with an incoming html request?