Hello. In last 4.5.8 version of bOS I noticed "bad UTF encoding" in KNX import section. In our language we use lots of accent word and in past version it was fine but in last it is doing this:

Maybe I am missing some settings but I have country set to SK and also user language to Slovakian. 

Hi,

I am trying to integrate a Grünbeck Softliq SC18 water softener using HTTP POST, but for some reason I can't get the response values back.

bOS sends the POST command correctly and the response is what I would expect from what I can see in the packet capture. The problem is apparently bOS doesn't like the response and doesn't store it. There are also errors in the log, but I don't know what they mean.

What am I doing wrong?

Thanks

Sebastian

packetcapture (3).cap

In the new BOS version (4.5.x) is it possible to group speakers.

Is it also possible to ungroup speakers?

Example: group speaker 1 + speaker 2 to group 1 and then ungroup group 1 to speaker 1 and speaker 2.

Hello everyone

after  bOS 4.5 update the ip cameras no longer working and streaming !

any ideas ?

Dears Support,

I discovered a ModBus bug in the new version 4.5.5: after few hours the modbus communication driver stops to work. In order to restart you need to reconnect to the server with the configurator toll, select the device modbus deactivate and enable again… after it starts to work again for other hours before stop again

I also tried to restart the server again, but it didn’t solve the problem

Can you have a look on the modbus part of the new server version please?

Regards

Marco

Anyone no how connect a solar inverter kostal with confortclick?

It have a rs485 port but no communication with confortclick. 

Can anyone help

Thanks

Hi,

I've upgraded to bOS v4.5.0 and noticed the old way for RPC doesn't work any more.

The change log of v4.5.0 says there is a new RPC with authentication but cant find any manual about it.

Any body know's how this new RPC works?

More then half of my installation works by the RPC interface and currently nothing works and need to downgrade back to V4.4.4

Hello,

is it possible to save users' activity in a log file? 

In a form like Date-Time-Action?

I'm using sledgehammer server and i want to do it in a Hotel KNX installation. 

Thank you,

Charis Meidanis

Hello,

I'm trying to test out the new Fibaro HC2 integration. However after adding the IP address, my username and password, bOS server is unable to stay connected to the HC2. It only connects for a split second after every 30 seconds or so.

At the same time I can control devices on the HC2 from bOS without any issues using the Fibaro http API.

Devices : 3.06.2019 10:52:33 : Error : Devices\Fibaro : Error connecting to device.
Devices : 3.06.2019 10:52:33 : Error : Devices\Fibaro : Error: Object reference not set to an instance of an object. at ComfortClick.Fibaro.Driver.FibaroDriver.CreateDevice(JToken device)
at ComfortClick.Fibaro.Driver.FibaroDriver.OnSent(HttpQueueItem item)
at BOSCommon.Drivers.SendQueue.HttpQueueItem.OnSent()
at BOSCommon.Drivers.Common.DriverBase.Write(QueueItem item)
Devices : 3.06.2019 10:52:32 : Event : Devices\Fibaro : Device is connected.
Devices : 3.06.2019 10:52:02 : Error : Devices\Fibaro : Error connecting to device.
Devices : 3.06.2019 10:52:02 : Error : Devices\Fibaro : Error: Object reference not set to an instance of an object. at ComfortClick.Fibaro.Driver.FibaroDriver.CreateDevice(JToken device)
at ComfortClick.Fibaro.Driver.FibaroDriver.OnSent(HttpQueueItem item)
at BOSCommon.Drivers.SendQueue.HttpQueueItem.OnSent()
at BOSCommon.Drivers.Common.DriverBase.Write(QueueItem item)
Devices : 3.06.2019 10:52:01 : Event : Devices\Fibaro : Device is connected.
Devices : 3.06.2019 10:51:31 : Error : Devices\Fibaro : Error connecting to device.

Hi

I am trying to configure a zipato z-wave remote to my controller. 

Device discovery seem to show the various functions; basic, battery, emergency. 

However the configuration parameters are missing, and if I try to add the set described by the manufacturer, by using the add functionality in the parameter menu. The values are not save correctly to the device using set. (no error is given) . Using Get, after  the set, the parameter seem to be reset to the "default" value.

To be able to use the remote, I need to change the output values for each association group (82-89), to be able to recognize the different buttons pressed from bOS. 

Have anyone made this remote work with bOS? If so how did you set the parameters? 

Any tips on adding devices where bOS does not download the parameter set?

Thanks