Hi,

I'm trying to fetch energy prices from a public available API with a JSON array.

The data I'm trying to get can be found in this link:

GET https://www.hvakosterstrommen.no/api/v1/prices/2022/10-02_NO5.json

I have tried to play around with the url with different parts in the http settings and in the command settings. Anyone able to make this work?

Need some help. I have a modbus relay and to turn on and off I have to write FF 00 for on and 00 00 for off to the relay with function code 5 (Write to single relay) how do I do it in jigsaw? Byte 1 adress byte 2 function code byte 3 4 adress of register (big-endian) byte 5 6 data of register (big-endian).

Hello, is it possible to remotely program ets over a purchased cloud connection? or how to get it when the client doesn't have a permanent public IP address?

Good morning,

I should send an API notification to a Mobotix camera and ask you for help

I have to send this TCP string

http://192.168.30.22/control/control?set§ion=settings&armcond_ac1_source=disable

I used the HTTP connector and I am connected with the camera.

I don't understand how I have to set the Comand object

Hello. 

Is it possible to restrict access to configure the KNX project through a Jigsaw via configuration to reactivate it when you need to configure something?

Hello, Best regards

I have a grinder black connected to unifi switch, with a vlan set to automation and a KNX IP interface connected the same vlan both with static IP fixed, I follow each step to configure bOS server but the server not connect to IP interface. Show the message: Devices|KNX\garage\lights on/off\c13_garage_rail No response: Read0/0/20 Devices\KNX\GARAGE\lights on/off  

have any of you ever had this problem?

Hello, I'm would like to open door via DoorBird from BOS client

I imported DoorBird library example

Camera integration works fine

Relay 1 on Device Control (with same IP configuration) is not working

Any idea?

Many thanks in advance

BR

Alessandro

I would like to know if could comfortclick  read my project from a house with 3 floors ? 

In this house I´m using two line couplers, connecting first floor to second and second to third

I have a push button in level one that connect with actuator on level two, they are conected through a line coupler. Does Comfortclick read this information and make it work ?

Hello everyone.

I know there are already posts about it, but I don't see a problem similar to the one I currently have in any of them.

I have a Jigsaw connected to KNX by bus cable.

The problem is that sometimes due to power outages the Jigsaw and the KNX bus go down and not always but on certain occasions when both systems are up. the Jigsaw is not capable of lifting the link with KNX indefinitely and the only solution that can be applied is to restart the Jigsaw and at that moment it raises the link between both systems again.

Is there any way through a program, task or function that allows forcing to deactivate and reactivate the knx connection when it detects that the link is down? Or failing that, to be able to send some kind of Jigsaw restart through some function that “wakes up” the connection with KNX?

Thank you

Hi guys,

The default baud rate comes as 9600 for the DSC IT-100. Do you have any tips on how to change it to 19200 for virtual keypad? 

Could it be done using the key pad PK5500?

Thanks,

Calin