Hi

I need to provide Smart TV options for clients. From what I understand the Samsung (new models <6 years) aren't supported and I can see there's an LG on the device list but not sure if there are also limitations on LG Models

So before making recommendations I'd like to be 100% confident which TVs and Models will work and what if any limitations there may be.

Thanks 

Hello, does anyone made integration to Shelly 2.5 device? 

Comfortclick published a Shelly integration but its only for 1 switch 1L and not for 2 switches.

thanks

hi, i would like to know if you have any plans on integrating coolmaster devices to comfortclick

is a great solution for integrating HVAC systems

https://coolautomation.com/

Hello,
I have added a third stream to my CC today. Since then I get the error message that there is not enough memory. This must be some kind of error since it can't be the memory with only three streams.

Has anyone else had this?
What can I do?

Hello guys,

Has anyone integrated in bOS and can share some info for GE wi-fi appliances such as fridge, oven, etc. 

Any suggestions on how this can be done?

Thank you,

Calin

I need to link a scada visualization of another server with a frame of comfortclick. The example is a Logic machine visualization. I enter this link (http://user:password@192.168.1.200/scada-vis/#87) but it doesn´t works. Are there another way?

Hello,

I try to get the value with the basic device and UDP request. 

The answer is in json and the answer is correct you can see below an example

{
"ID": "2",
"State": 1,
"Error1": 0,
"Error2": 0,
"Plug": 3,
"AuthON": 0,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 13000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
}

When I try to read the data with the space for exemple "Enable sys" I have the error  "Error parsing received data. : Unexpected character while parsing path:"

How to decode the value with space ?

I try somes codes for space but nothing work.

Can you help me please ?

Hello.

I have a Grinder module, and I would like to connect a Solar Inverter via UART. In the Grinder module, I have connected the CP2102 adapter to the USB port, bOs recognizes it perfectly in the COM3 port. According to the solar inverter documentation, the communication is UART, 115200bps, 8bits data, 1 stop bit, no parity. The COM3 port, so I have configured it. But I can't get a response from the inverter. I have tried all the combinations on the bos, but I cannot receive data. Any suggestion???

Thanks...

Hi, could i know how to set the 1byte fan speed (aircon mode) group address in the task. Scene? so I can change the setting in the scene function page.

Hello.
I have problem with ETS 6 returning error on bus test, when I try lets say IP interface it is working fine. But both interfaces works with ETS 5