Hello, 

I want to use RPC to trigger a function. 

I've seen a POST data example that you suggested on a document : 

{"objectName":"Building\General\Users\User","functionName":"SendAlert","value":["'Hello'"]}

I want to run a RunFromClient() of a program : so, there are no parameter / value to send in the function. 

I've tried {"objectName":"Tasks\\beds24\\THStartHeating","functionName":"RunFromClient()","value":"true"} but it's not working. Could you confirm the syntax when there are no value to send within the function ? 

Thank you very much, 

François 

Hello,

I have noticed that my bOS server is not being updated. I don't really know if it is a conexion issue but is very strange....

Everything started with a problem of conexion to the server and I realized that my internet provider changed my IP address. I have the dinamic IP configured in the comfortClick web page but I changed the IP address shown there. There is something strange there as my server continued appearing off line... But anyway, the bOS client worked....

After a while I realized that the weather application was not working and digging into the problem (is not working jet) I found out that my server is not being updated ... I have the version 4.8.15 and the current one is 4.9.13. I tried in the configuration and it is saying that is up to date...

Can any one help? What if I download the new version and i try to reinstall it? Is the program going to warn me and update with any configuration losses?

Thanks in advance,

Pablo

I need to integrate the measures of a Carlo Gavazzi WM12, but this has 4 wire connection.
Can you help me?
Thanks in advance.

WM12 CP v1r1 ENG 0903.pdf

Hello,
Recently I have noticed that there are some icons that are not integrated correctly in the visualization.
it can be fixed?

On the other hand, how do you make the line stroke change depending on the chosen color?
in the image some do and others do not
and if I edit an svg icon put that color so that it changes the same as the rest of the icons

Good Morning.

How can I integrate my sonos devices to reproduce a Doorbird call in Comfortclick?

hi where can i the Token  Name for shelly devices

im trying to read the temperature using a interger device as is showed in the mqtt video for BOS

but i do not know what is the token name to write.

Does anyone know if a change in setpoint performed with the physical switch affect the setpoint in bOS.

In other words, can you change setpoint with both? KNX physical switch and bOS? And it will sync. automatically? 

Regards

I have a little problem integrating Shelly through the tcp server

Shelly integration is in your libraries https://www.comfortclick.com/BOS/Library/Devices/115

Everything works fine except the listener.

The listener is configured as a tcp server, accepts connections but does not respond and does not close the session which causes Shelly to hang.

Shelly expects any response from the host or session closure.

I did the tests using https://docs.microsoft.com/pl-pl/dotnet/api/system.net.sockets.tcplistener?view=net-6.0

If the listener answers the call from Shelly or closes the session, everything works fine.

Conversely, when the host accepts the call and nothing returns or closes the session, Shelly stops sending calls to the host and suspends Shelly until a reset. Shelly appears to be waiting for any information from the host, without it being able to complete the routine.

In the code from the MS website from lines 45 to 63 there is a procedure that sends back to the client what the client sent, while on line 64 the connection is closed.

Removing these lines causes the problem and probably simulates comfortclicka operation.

Is there any call that will get a reply from comfortclick's website eg http://192.168.1.10/comfortclickreply?par=1?

Alternatively, you could add a checkbox as an option - "Send this message as confirmation:", "message" ?

checked on bOS v4.9.8 and Shelly 1 with fw 20220209-092750 / v1.11.8-g8c7bb8d

Hi everyone,

i have a jigsaw connected to a Modbus interface module MIM-B19N Samsung. I have the next parameters:

I attach the datasheet of this module to compare if you need:  Manual Interface MODBUS Maquinas clima Samsung.pdf

The question is that some times, randomly, the communication breaks down and we can control any of indoor units we have. In addition, i attach a screenshot of Jigsaw's logs:

I don't know if the problem is because of driver's parameters or firmware error. I will appreciate any help .

Thanks

Hello, 

My bOS client can't connect anymore.

I rebooted the iPad, the server, I deleted the iPad from the server. I tried with another Wifi network.

I wanted to delete the profile and add it again : I can't add the profile anymore. It's hanging, and then a "back" button is displayed. 

The problem is still there. 

It appeared all of a sudden on 3 iPads ; none of them can connect anymore.

Server Jigsaw 4.7.0 ; bOS on iOS 9 (old iPad ; can't upgrade to latest iOS version)

What is very strange is : 

- it was working before, and I didn't make any changes on the system

- it's working remotely from a recent iPad 

Do you have any ideas where it could come from ? 

Any ways to help to analyze what is happening when the client cannot connect ? There are no meaningful error message displayed. 

Thanks, 

François