Hello,

Does anyone manage Johnson Controls ventilation unit via Bacnet? Does it work good or bad?

Our customer wants to manage Johnson Controls huge ventilation station in offices and ventilation controllers are Johnson Controls IOM and Johnson Controls FEC. As I understood, we have to connect IOM controllers via cat6 cable and connect it via bacnet in bos configurator, then I have to find which addresses has managing functions.

Maybe I have to connect it other way?

Will be thankful for any advise.

Regards,

Artjom

I have 2 variables Double (setpoints) A and B. When I change the value in one I want the following rule. A can´t be smaller than B and B can´t be bigger than A . Any ideas?

Hi, I have already seen in the description that it works for the F454 but, please, could you confirm whether or not it is compatible with the Bticino F453 server? I have a client with this model, I have made several tests and there is no way it works and I don't know if I am doing something wrong or if it is simply not compatible.

Thanks for your help. Regards

Pablo

Dear

I am working on an energy measurement project for a customer, in which I intend to implement Comfortclick/bOS as the management system.

I have established a modbus connection between an energy measurement device from Finder and the bOS. I simultaneously noticed that the measurement (voltage, current and power) shown on the Finder display differs from the reading obtained by the bOS which is slightly higher.

Settings:

Connection Type: Serial

Serial Transmission Mode: RTU

Low Word First: False

Low Byte First: False

Data Format: LittleEndian

Write Function Type: WriteSingle

Read Function Type: ReadSingle

Modbus Table: InputRegisters

Data Format: Signed32Bit (to power) and Unsigned32Bit (to voltage and current)

Scale Factor: 1

Use Status Address: False

Readcyclically: True

Please, could you help me with the configuration in order to get the correct reading?

Thanks,

Eduardo

Hello,

I would like to control a Web Relay (Controlbyweb) from Jigsaw.
which device should I use?
relay ip address: 10.10.10.84
login: admin
pw : password
on command: http://10.10.10.84/state.xml?relay1State=1
off command: http://10.10.10.84/state.xml?relay1State=0

Thanks for your help

Hi,

Its it possibe to read group value from bOS server. :E.g: "GroupValueRead" sent from KNX network and then get response "GroupValueResponse" from bOS?

I tried to change "Read" flag to "TRUE" under Commuunication section but bOS is still not responding to "GroupValueRead"

Have anyone tried elering v2 from the examples library?

I don´t get any prices and I don´t know what I am doing wrong.

I've seen some similar posts, but no one regarding KNX connection. I do have problems to connect through Jigsaw KNX and every few seconds I get this error. Does anyone know how can it be solved? Thank you in advance

Hi.

Did anybody have integrated Shelly 3EM to comfortclick?

Thank you.

Hi to all,

I need help to use HTTP to setup API Integration for Somfy.

Any suggestion? i always get Unauthorized

I'm trying to use this guide: Somfy API Developers but without success.