Hello.
I have problem with ETS 6 returning error on bus test, when I try lets say IP interface it is working fine. But both interfaces works with ETS 5

Hello

I have a Hormann Garage Door with Hormann KNX Gateway where I have option for going Up and Down.

For this I create two buttons. One for Up and one for Down. When I press Up button I set show confirmation to true and I added a pin to avoid Garage Door opening by mistake since from there you can enter directly in my house.

These is my confirmation setting.

When I press button bellow confirmation appear 

Now come my problem.

If I put the pin everything is working fine and door is opening

If I press cancel (X button from right up corner) dialogue gone but instead to have same Garage Panel it go at main Panel.

So in case of aborting I should remain in same page.

Any idea if this is a bug and how I can fix it?

Best Regards

Valentin

Hello,

I have a client who asks me about the possibility of being able to PING with the bOS system on an external IP to get a signal if the external IP interface is not responding.

Can we manage this functionality with bOS?

Can we send an http string to be able to perform this function?

Can you send me an example?

Best regards

Giordano Olmi

Hello, I have clients who complain about the blocking of the live cameras on the PC client.

To be able to reactivate live, they must close the windows app and reactivate it.

The cameras are all configured with snapshot mode.

Can you tell me how I can solve this problem.

Best regards

Giordano Olmi

Hello,

I have a problem with the BOS Client for iOS.

The application crashes randomly.

Sometimes it works for several hours, sometimes it turns off after two hours. It looks like the application is "killed".

After switching on the application, you have to select the profile again.

By the way, could the profile load automatically, like on the Andorid application?

The BOS client is set to connect manually over the LAN. But that doesn't matter either, I tried via ID too.

This is not an iPad or iOS problem. In the showroom I also have other systems and the application of a different solution may be active for months. When it loses connection, it displays "lost connection" on the top bar and automatically reconnects when it comes back. Almost imperceptibly to the user.

I guess it's not really rocket science to make BOS client work similarly.

I observe the problem with turning off the application both on the new iPad and on the previous generation. In two different locations, on two different servers.

It is similar with camera support.

Streaming on the iPad application does not work (Dahua, Doorbird).

If I insert snapshots from four cameras, the Windows client displays the lack of resources error after a few seconds, and the iOS client turns off (like a killed app).

Best regards

hello,

I have a piece of json data.

I got the temperature data with token setting : data[0].st , I want to just take the numeral data and remove the letter : 26.0C to 26.

Please help, thanks

Is there a way to attach some actions on triggers for KNX devices (i.e. trigger something if knx button writes to knx light)?

I want to add some extra behavior on second click like if lights are on and somebody click the button again switch on even more lights, etc.

When I try to import KNX project exported from ETS5 as .esf extension Addresses are correct as in bellow image

When I try to import KNX project exported from ETS5 as .knxproj extension Addresses are not correct. Please see bellow image.

I use bos configurator 4.9.1.

Is this a bug?

Hello. 
I noticed that in weather widget there are two misspelled word.

Word "Slnko" is Sun not sunday and it should be just short as "NE" and Wind chill is not translated and it should be "Pocitová teplota".

Since the energy prices have gone up I would like to import energy prices to bOS so I could make some desicions according to energy prices. I have read the manual about http driver but I am not a http and api expert and I am not able to understand the manual. Has anybody done such a thing and could explane or share demo how to read values from homepage or api. I understand that reading is different in different pages but maybe with some example I would understand the idea how to GET value to bOS.