Hello!
I added a zipato rfid keypad to colibri. I can't find a setting for using USER_CODE_SET command.
the device is: http://manuals-backend.z-wave.info/make.php?lang=en&sku=ZIPERFID

Can you give me a solution?
Thanks

Jak się zaopatrujcie się na wizuaizacje postawioną na panelu Akuvox IT83? 

jatkie rozdzielczości dobrze są wyświerlane ?

Hi all, 

I'm facing some issues with downloading my components with ETS5 and generate the ETS export file to import afterwards in bOS. 

In bOS the Jigsaw KNX is std. CCJigsaw 0.0.1.

When I try to connect in ETS5 with CCJigsaw 192.168.1.16:3671 to Individual Address 0.0.1 for downloading my components I get the error: "The individual address is already in use by another device."

I was not able to add the Comfortclick in my topology.

Someone who can assist my with this?

Should I connect with USB directly to the module instead of connecting over wifi?

Hi there,

I'm trying something simple but seem to miss something.

I wan't to read the operating time from the ECG's in the dali gateway.

I gave the operating time there own knx adres but I can't read the values in bos ??

Hello,

After import KNX group adress into bOS, the sorting is not good.

Can you in the next version sorting by group adress to smallest number to largest number ?

it's useful for commands integration and nothing forget

I'm owner of JIGSAW device without possibility to get public IP address. While looking for workarounds I have found the ngrok service which offers tunnels accessible via URL links. As long as I understand JIGSAW is simply raspberry pi device with custom linux os running under the hood. I wonder if I could login to the device using the ssh to access the root account for purpose of installation and setup of ngrok service. Will you be able to share those? Is ssh access enabled?

Are Hue motions sensors supported within the HUE integration? 

I'm looking to detect a motion trigger and control my non-HUE lights with a Program-integration. 

Is this possible? 

good morning, since the installation on the beta version grinder, there are repeated interruptions in the operation of Modbus RTU in the application there is a connection, but the controllers stop interrogating the devices, it is not enough to pull the controller from the USB socket because it has no effect, but without turning it off, turn off the connection and turn on and suddenly call back .

Hi,

Its possible to shutdown Jigsaw from Bos Client or with UPS conection?

I want to shutdown Jigsaw when UPS is about to finish battery charge and have safety stop. Even with a button in bOS Client should be fine.

Regards,