If A user add an extra device but with the model-type, it is not show a separate device in de list under that User

How can  a User change the name so it shows as separate?

Going to settings on the device does not allow to change the name. 

does anybody have any experience using webhooks on the jigsaw pro?

I want to integrate my unify G4 doorbell's fingerprintscanner, to open my door, and i have a jigsaw running my KNX.

If i can get the G4 to communicate with my KNX, i could make it happen

Fibaro radiator thermostat error message Devices : No response to Battery.

Every hour for each valve.

It is set to: Enable polling

It transmits the battery charge value at the set interval with polling.

But why does it put a No response to Battery error in the LOG?

Hi,

Already installed Jigsaw CC-JS-2  bought in 2022.
We already install Configurator, but after change passw the device is not discoverable on WiFi.
We are trying to Restore Factory Settings took 30s push the reset button, nothing happened.

On IPScanner not appear anymore
Please let me know what we can do? Can you connect on remote to fix the issue?

Hi,

I'm creating a temperature line chart in Comfort Click. The input data is transferred from the heat pump via the KNX bus. The chart generates correctly, but one incorrect, random value (e.g., 20000) scales the chart so that it becomes unusable. Photos attached. Have you encountered such a problem, and how can it be solved?

Regards

Zbyszek

KNX disconnect two times a minute. Any ideas what could be wrong ? 5 years was no problem, with last update 4.11.8 problem started.

I'm trying to load weather data from the web, but it's not visible in bOS Config. However, it is visible online on the website. How can I fix this?

Hi there,

Is it possible to completely get rid of control buttons?

back arrow marked as 1,

fullscreen toggle/history/user menu marked as 2,

page title marked as 3

I just need a clean visualisation page. Nothing except what I place on the working area :)

hello, the doorbel G4 pro has finally received the update so the fingerprint is active.

I want the fingerprint to give a command to my KNX system, opening the door. Had anyone already found a way to webhook it to the bOS?

Hello. Any ideas how can i read a UCHAR data type in configurator? I have a ventilation system with 0-Stop , 1- Economy, 2- Comfort, but i don't understand how to convert the value in configurator.

When is on, the value is 512, but i don't know from where that come. Thank you!