Hi,

I have installed and added to Z-wave node the Carbon Monoxide Detector, ZCOMBO from First Alert.

Based on the manufacturer manual the following command classes are supported:

• BASIC

• BATTERY

• CONFIGURATION

• ASSOCIATION

• ALARM_V1

• MANUFACTURER_SPECIFIC

• VERSION

When integrated in bOS I do not see the Alarm Command Class being available. Here are the parameters that I am looking for to monitor:

Alarm                                    Alarm Type                        Level

Smoke Alarm                    0x01                                      0x00 or 0xFF

CO Alarm                            0x02                                      0x00 or 0xFF

Malfunction Alarm          0x09                                      0x00 or 0xFF

Test Alarm                          0x0C                                      0x00 or 0xFF

Heartbeat Alarm              0x0D                                      0xFF

CO Sensor End of Life    0x0E                                      0x00 or 0xFF

I was assuming to find all the alarms under "Notification" class command, but only the following are available:

The values are not changing when the Test Alarm is active(the test button is pushed).

The Battery value has changed, that's how I know the device is communicating.

The device is Associated to Controller 1.

Could you please advise if the alarms can be monitored in bOS?

Thank you,

Calin

I backed-up my config on server A, moved the backup file to server B, and restored the config on server B bOS install. The idea is to be able to work on my programming on a laptop while on the move.

Up to recently, that was working fine. But now, the restore comes up with an empty configuration. The file itself is not empty, but the config on B server is empty. 

It looks like the restore crashed, but no error message, nothing in the logs, and I get a "restore completed" message. 

Any ideas where this can come from ?

Hello! I'm learning to use Http devices to send data to an API, but I need to do the opposite. I mean, I press a button in an external application, and I need it to send a command to ComfortClick. Is there any URL in comfortclick to get json data, or text data?

Thank you! 

I would like to intercept a hue switch button to turn on a light under knx? how can I do?

Hello everyone

I am trying to take gold price from http://www.kitconet.com/ into bOS interface 

The website provides gif image !

Any ideas how to do that ?

I'm experimenting with Amazon Echo and it's pretty impressive to turn on lights, dim lights, lower the curtains, control my Sonos by speech commands.  Congrats to the bOS team to implement this and looking forward to more functionalities.

I'm struggling however with the bOS Thermometer reference and Target Temperature Reference.  I've created two appliances. One called 'Room' with only the Thermometer reference filled in (KNX object with room temperature) and this works fine.  For the heating in that same room I created another appliance called 'Heating' with the Target Temperature Reference pointing to a KNX object with the group address of the temperature setpoint input in the Address field and the setpoint feedback object in the Status Address field (this works fine in the bOS app both setting and the feedback).

Using the 'Heating' appliance I can easily set the setpoint without problems.  When I however call: "Alexa, what is the Heating set to ?" as indicated in bOS configurator, (s)he replies with the room temperature instead of the heating setpoint (Literally saying: "The temperature of the room is ... degrees").  This is very strange since the room temperature group address is not even linked to the 'Heating' appliance in bOS but only to the 'Room' appliance?  I checked and both group addresses (the Address and Status Address group address) of the object referred to in the 'Heating' appliance both give the correct setpoint value.  I tried removing both appliances 'Room' and 'Heating' and re-creating them but without success.  I'm really curious if I'm making a mistake here or if there is a small bug in the bOS appliances ?  Any suggestion welcome.

WE ARE NOT ABLE TO SEE THE GRAPHS PLOTTED. WE CALCULATED THE ADDITION OF POWER FROM 3 Z WAVE DIMMERS AND TRIED PLOTTING THEM ON GRAPHS. PLEASE HAVE A LOOK IN THE PROGRAM THAT I HAVE MAILED YOU.

Hello guys,

I have added to the Z-wave node the  Leviton dimmer DZ6HD. It responds to the commands initiated from UI to toggle and dimmer the lights connected to the switch. If I operate manually the switch the status does't get updated in bOS. Have any idea why it doesn't work?

Thank you,

Calin

Hello,

I am trying to enable the ComfortClick bOS Smart Home skill from Amazon.com and I am getting the following message: "You are not eligible to enable this skill due to geographical restrictions.".

Any suggestions on how I can get this skill connected to the bOS?

Thank you!!!

Regards,

Calin

Dear All

I have the server running on widows 7 starter.

I can access the server trough http://<your local IP>/ but from https://<your local IP>/ doesn't work.

I've checked the ports and they aren't blocked in the firewall.

I think this is the reason I can't put my alexa working (in the site appears that "she" makes connection trough https).

Can anyone help me?

Thanks