hallo 

watching your webinar, i tried to connect an android and iOS app with boss

The app is milestone mobile for ip cameras

no matter with android 

the setting is  : program  com.milestonesys.mobile , the app opens 

with iOS the setting is correct : apple.com/it/app/milestone-mobile/id498447321?mt=8

but i'm connected with the app store, then i've to open the app and then it runs.

Is there an url command to open the app without using the app store?

Regards

Good afternoon,

In the bOS Help, IP camera page, in the Wanscam example, please replace :81 with [:PORT]

Regards

Michael

Hello,

I tried importing KNX Group Address of 'Scene' which is 0/0/3 1 Byte Scene Control but it is not visible in the ComfortClick project. 

Steps followed were as follows:

1. Import KNX Group Addresses from XML file.

2. Define Datapoint type.

3. Select "Next".

4. I get the status as 'Imported Selected Tags'

5. While defining Template, that tag is not visible.

Hi!!

Is there any options to make Sun related Schedules? I mean, to run a schedule when the sun sets, or rises. I know we have the Sun events, and they can be used in Programs, but our clients uses to configure theirselves the scenes and schedules, because it's very easy for them and comfortable for us, but they can't touch the programs.

They use to ask us for schedules "when the sun sets" or "when the sun rises", but I think we have no way to use Sun events on the schedules.

Do you think it could be interesting to develop as a Parameter of the Time Events on the Schedules? It could give the chance to set the time related to day or night events.

For example, in the time field to set 01:00 (1 hour), and in the parameters set "Before sunset" or "after day time", kind of.. It'd be very interesting.

Maybe there's a way and I just don't know it, I apologize in this case not to know how.

Thank you very much!!

Best regards

Fernando

Dear support,

I have an issue with the Dlink 932LB camera. I configured the camera manually in the BOS server application and I stream the video with following settings: Streaming Mode: directly and MJPEG source: http://admin:fucile@192.168.115.25:80/video/mjpg.cgi

It works perfectly as long as the mobile BOS application (I’m using the last version available per apple IOS) is connected to my local Wi-Fi: I’m able to see the images coming in the application. Instead when the mobile BOS application is connected to the server via 4G the camera image shown is completely dark (I don t see anything)

The strange think is that I’m using with the same configuration in the BOS server another camera (It’s a Grandstream model GXV 3610 FHD) and it works both when the BOS IOs application is connected in local WiFi or in 4G

Can you help me to solve the problem?

Regards

Marco

Hello,

How do i get access to Jigsaw KNX which is at the site through bOS Configurator  from my Office Network or Home Network? 

All of the dimmer lights stay at 0% so I can not use a boolean as a toggle switch (ON/OFF). The ligths work but I am using a led dimmable light that does not support dimming from the switch (if I gradually increase it to any value below 100% it blinks) and instead uses a remote. I would like to set a boolean value and control it from the client/echo device.

Hi,

I can not connect to Satel (via ETHM-1 PLUS). This is my configuration:

Hello,

I have 5 Sonos players. When they play different musics, all is fine. When I group together some players, only one of the players continues to display the title and the album picture correctly. The other ones do not display picture anymore, the title is wrong (it is the title that was previously played). The track time is also incorrect. 

I often get the "Cyclical reference detected" on one of the Sonos devices, but this might not be linked to the above issue. 

Thank  you for your help,

François 

Hello,

I have a z-wave water detector for which the Controller 1 cannot be set to Association Group 1, therefore the alarms and device status are not communicated to bOS.

I have tried several times to restore sensor to the factory default settings, include, exclude, delete then click discovery, soft reset the controller, wake up the device, run Refresh Configuration from the Functions tab.

Am I missing something? Do I have any other options on having the Controller 1 set to Association Group 1? 

Thank you,

Calin