Hello

Is there anyone that have some more symbols, especially different kinds of light symbols, like ceiling spot lights?

There is one reciver with 4 channels and 2 recivers with 1 channel.

The problem is with the IP addresses. In heos app, I can make the IP address static. But I don’t know how its possible, but the zones are switching places.

First when I configured the IP addresses, then for example I connected to the kitchen reciver with IP address 192.168.1.24. Some days later, If I send play command to this IP address, the sauna reciver starts to play.

Is there a way to fix this problem?

I'm working on a way to turn on a schedule if one of 3 boolean values is set to true. 

I've had to create a work-around since a Boolean Group only turns to true if all references are true. (=AND)

It'd be great to have a choice on how the Boolean Group works: in this case an OR-functionality would've made my job quite a bit easier.

I was thinking the same thing for de Double groups. At the moment its output is the average of all double references.

Would be great if there were a choice in the calculation it does (SUM, PROD, MED, etc.).

So just wondering:

any plans for adding a way to select a type of calculation on the different variable groups?

Would be a great addition!

Goodmorning

Is it possible to restart communication for example with KNX devices by writing with a program directly on the communication point?

Is there a way to diagnose (remotely) MODBUS USB dongle connected to Grinder? It stopped working :( I receive error: "Port is in use by another driver or process". Changing COM port in BoS Config does't work (ie says that port is not available), restarting server also doesn't help, turning diver on and off doesn't help, connection status is FALSE.

Hikvision Alarm Panel protocols.jpg

Hello everyone,

I have an HikVision alarm system wich are using SIA-DCS protocol, how can I integrate on JigSaw & bOS Config?

Thank you

Nelu

does anybody have any experience using webhooks on the jigsaw pro?

I want to integrate my unify G4 doorbell's fingerprintscanner, to open my door, and i have a jigsaw running my KNX.

If i can get the G4 to communicate with my KNX, i could make it happen

Fibaro radiator thermostat error message Devices : No response to Battery.

Every hour for each valve.

It is set to: Enable polling

It transmits the battery charge value at the set interval with polling.

But why does it put a No response to Battery error in the LOG?

Hi,

Already installed Jigsaw CC-JS-2  bought in 2022.
We already install Configurator, but after change passw the device is not discoverable on WiFi.
We are trying to Restore Factory Settings took 30s push the reset button, nothing happened.

On IPScanner not appear anymore
Please let me know what we can do? Can you connect on remote to fix the issue?

KNX disconnect two times a minute. Any ideas what could be wrong ? 5 years was no problem, with last update 4.11.8 problem started.