Dears Support,

I discovered a ModBus bug in the new version 4.5.5: after few hours the modbus communication driver stops to work. In order to restart you need to reconnect to the server with the configurator toll, select the device modbus deactivate and enable again… after it starts to work again for other hours before stop again

I also tried to restart the server again, but it didn’t solve the problem

Can you have a look on the modbus part of the new server version please?

Regards

Marco

Anyone no how connect a solar inverter kostal with confortclick?

It have a rs485 port but no communication with confortclick. 

Can anyone help

Thanks

In the 4.5 version, sometimes I can't change some objets inside frames. When I click to chose them, the configurator selects the whole frame, and there's no way to select the object inside. That's pretty critical, because I can't change important features of my visualizations. Could you check it? It doesn't happen always, but when it happens, is very annoying.

Thank you!

Hi,

I've upgraded to bOS v4.5.0 and noticed the old way for RPC doesn't work any more.

The change log of v4.5.0 says there is a new RPC with authentication but cant find any manual about it.

Any body know's how this new RPC works?

More then half of my installation works by the RPC interface and currently nothing works and need to downgrade back to V4.4.4

Hey,

I don't know why but I can't access my old user anymore.

I want to register the machine I have, which already has it's own licence, to my account.

In the controllers page I can't find a register button, nor anywhere else.

Hello,

is it possible to save users' activity in a log file? 

In a form like Date-Time-Action?

I'm using sledgehammer server and i want to do it in a Hotel KNX installation. 

Thank you,

Charis Meidanis

Hello,

I'm trying to test out the new Fibaro HC2 integration. However after adding the IP address, my username and password, bOS server is unable to stay connected to the HC2. It only connects for a split second after every 30 seconds or so.

At the same time I can control devices on the HC2 from bOS without any issues using the Fibaro http API.

Devices : 3.06.2019 10:52:33 : Error : Devices\Fibaro : Error connecting to device.
Devices : 3.06.2019 10:52:33 : Error : Devices\Fibaro : Error: Object reference not set to an instance of an object. at ComfortClick.Fibaro.Driver.FibaroDriver.CreateDevice(JToken device)
at ComfortClick.Fibaro.Driver.FibaroDriver.OnSent(HttpQueueItem item)
at BOSCommon.Drivers.SendQueue.HttpQueueItem.OnSent()
at BOSCommon.Drivers.Common.DriverBase.Write(QueueItem item)
Devices : 3.06.2019 10:52:32 : Event : Devices\Fibaro : Device is connected.
Devices : 3.06.2019 10:52:02 : Error : Devices\Fibaro : Error connecting to device.
Devices : 3.06.2019 10:52:02 : Error : Devices\Fibaro : Error: Object reference not set to an instance of an object. at ComfortClick.Fibaro.Driver.FibaroDriver.CreateDevice(JToken device)
at ComfortClick.Fibaro.Driver.FibaroDriver.OnSent(HttpQueueItem item)
at BOSCommon.Drivers.SendQueue.HttpQueueItem.OnSent()
at BOSCommon.Drivers.Common.DriverBase.Write(QueueItem item)
Devices : 3.06.2019 10:52:01 : Event : Devices\Fibaro : Device is connected.
Devices : 3.06.2019 10:51:31 : Error : Devices\Fibaro : Error connecting to device.

Hi

I am trying to configure a zipato z-wave remote to my controller. 

Device discovery seem to show the various functions; basic, battery, emergency. 

However the configuration parameters are missing, and if I try to add the set described by the manufacturer, by using the add functionality in the parameter menu. The values are not save correctly to the device using set. (no error is given) . Using Get, after  the set, the parameter seem to be reset to the "default" value.

To be able to use the remote, I need to change the output values for each association group (82-89), to be able to recognize the different buttons pressed from bOS. 

Have anyone made this remote work with bOS? If so how did you set the parameters? 

Any tips on adding devices where bOS does not download the parameter set?

Thanks

Hey,

Is there a model list, as what models are supported? I couldn't find it. 
I have a LG 55SJ850V at home and this did not connect to it. 

Hello,
In the configurator, I have imported and updated a backup of an old password-protected project that I do not remember.
How can I access the configurator to update the demo project?
Thank you