Hey,

I made some control frames today with graphs in it. It shows me errors that i cant find. When i delete the control panel the error disappears, if i put it back it shows an error again. Could You make a separate tab for errors, example if an error occurs it would be visible in the errors tab, so we could find it right away, not needing to click through all the buttons.  

Best regards,

Jürgen

Hi,

When the exit function is used in a programme, bOS makes de KNX to restart completely, the only thing that should happen is for the programme logic to finish, however KNX is restarted. It took me some time to find out this, to the point that I had to put traces so that when the building and KNX were connected a trace would be logged.

I tis now confirmed, every single programme that includes the Exit sentence makes the building to restart, a significant bug to get fixed ASAP

I have a Fibaro Button which uses the Z-Wave command class Central Scene function to report one or more button presses. I have included the device and associated with the controller node successfully. Central Scene provides a KeyAttributes value which changes in response to multiple button presses. However, I have not been able to find a simple way to use the value - it does not appear in the usual dialogues for using a value, presumably because it is not a boolean, integer or double and there are no templates and I can't create one. My workaround is a program task which triggers on any change of the KeyAttributes value - I then have to use an "if" statement for each possible attribute value to set an integer variable. This seems to be a really complex way to be able to use the value - is there a better solution? I also have the same issues with the BOsEnum type which also lacks templates and value support etc.

Configuration Jigsaw, latest BOs, Aeotec USB Gen5

Hi,

Either this is a possible bug or there is something we are missing, effectively a graph (counter or analog) seems not to be picking up the values coming out of a calculation

a) We have three water counters, all work fine and record the actual consumption perfectly. There is 1 counter for the total and two partial counters. Let's say we have Area A, Area B, and Total

b) To calculate the water consumption on a 4th area (area C), we basically do a calculation, because the fourth measure comes from the calculation of Counter C = Total counter - counter A - counter B

c) The calculation task seems to work fine, the variable 'Value' shows the calculation at any given time

The problem comes when painting and tracking the output of the calculation task. so a graph can be used to show the consumption of this area, whose consumption is calculated as explained. We cannot show a way to get a graph paint the actual consumption properly

Calculation task (correctly showing a value of 3, meaning, there has been 3 litres of water used)

Counter task using the Value variable of the Calculation Task (Used to paint the graph below)

Graph of the above (clearly incorrect, as the overall day consumption of this counter using the calculation is 

Counter task using the Int Value variable of the Calculation Task

Analog task using the Value variable of the Calculation Task

Hello,

Since 2 or 3 months I have noticed that all my webhooks return the error below:

I think that a ssl certificat problem or error. 

What is the way to remove this problem ? Any Idea ??

Hi,

The timepsain variable type does seen to be a restricted variable type, i.e. I cannot create a string using such template, hence not making it available for making quick time comparisons between two variables.

In other words because the variable type is not available, it is not possible to compare two values, e.g. Time.TimeOfDay compared to "variable x". Because I cannot create a varaible X I cannot compare the Time of the day value offered by the system

Hello,

I have create some programs that will send values for dimming during time. I have created 4 different programs with 4 different time and different values for dimming. I want this to make this visible to the user so he can change the time and the sending value as he wish. How I am going to create this so everytime he will be able to chane the time and the sending value?

Thank you in advance

I was able to discover and include the device. 

In the overview of z-wave devices it says the device is 'Sleeping' and listening flag is off.

However I can intercept key attributes in the central scene, so he's listening.

But the values of 'Switch' and 'Multilevel Switch' never change.

I also want to remove the beeping when touching the device. This is done by setting parameter number 1 to value 0 instead of 1. 

Getting parameter number 1 does nothing and setting gives the error 'index was outside the bounds of the array'.

Hi 

trying to connect to knx system to program devices, I have this error:

"The connection to the KnxIpTunneling: RED - ***.***.***.***:3671 bus of line 1.7 New line could not be established.
The interface is not reachable."

any idea what could be wrong with the bOS setup?? thanks in advance.

details for the error are:

Knx.Bus.Common.Exceptions.ConnectorException: No ConnectResponse received
en ail.a(ConnectorMode A_0, ag2 A_1, CancellationToken A_2)
en ail.d.c(CancellationToken A_0)
en af9.c.c()
en System.Threading.Tasks.Task.InnerInvoke()
en System.Threading.Tasks.Task.Execute()
--- Fin del seguimiento de la pila de la ubicación anterior donde se produjo la excepción ---
en System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw()
en af9.a(ag2 A_0, Action`1 A_1, Action`1 A_2)
en ail.a(ConnectionTypes A_0, ConnectorMode A_1, Action`1 A_2)
en ail.hj(ConnectorMode A_0)
en Knx.Falcon.Bus.a(ConnectorMode A_0, Boolean& A_1)
en Knx.Falcon.Bus.a(ConnectorMode A_0)
en Knx.Falcon.Bus.q()
en Knx.Falcon.Bus.a(ConnectorParameters A_0)
en Knx.Ets.ViewModel.OnlineOperations.FalconWrapper.<>c__DisplayClass28_0.b__0(FalconOpenParameters openParams)
en Knx.Ets.ViewModel.OnlineOperations.FalconWrapper.CallFalconMethodWithOpenParametersAndRetryWithMacIfPossible(Action`1 action, FalconOpenParameters openParameters, Boolean checkUserLogin)
en Knx.Ets.ViewModel.OnlineOperations.FalconWrapper.GetLocalSettings(FalconOpenParameters openParameters, Boolean checkUserLogin)
en Knx.Ets.ViewModel.OnlineOperations.Download.DownloadManager.CheckForShowInterfaceSettings(Project project, KnxConnectionOpenInfo connectionOpenInfo, ConnectionContainer container)
en Knx.Ets.ViewModel.OnlineOperations.Download.DownloadManager.CheckLocalInterfaceSettings(KnxConnectionOpenInfo connectionOpenInfo, Device device)

I have a problem calculating correct value from Modbus registers of my device where decimal places are implemented by scale factor which is the power of 10. 

EG: if actual DC voltage is 50.45V the DC voltage register reads 5045 and DC voltage scale factor register is -2 which translates to 5045*10E-2=50.45
Unfortunatelly the scale factor keeps changing in regard to actual value so fixed scale factor is not an option.

A "dirty" workaround is with a program activated on change of either register values and then calculating via if-then method but it is inefficient and clumsy could be a source of error if program is interrupted.

Is there any other way to do exponentiation in a calculation like i.e.: number ^ exponent = ...