Hello

I need to write cyclically on knx the actual date and time. I want to use these values to set them on a meteodata theben not equipped with gps in order to calculate the sun position for shading my building. 

It is not possible to write value directly from GENERAL/TIME NODE, so

i've set a device DATE and a device HOUR with their knx addresses , but device date doesn't update since i set his initial value while the device hour changes but is different from the system value.

Can you help me?

Regards

I'm trying to put together a Task to run a pool circulation pump only on the hours when the electricity cost is the lowest. I can get the prices from nordpoolspot.com API. I end up with 24 Doubles, one for each hour of the day. But I have not managed to figure out a way to filter out the lowest values.

For instance I need to run the pump for 6 hours every day. So at every hour I need a way to check "Is this current hour one of the 6 cheapest hours for today?"

Any ideas?

es posible controlar con el comfortclick motores rts o motores io ?

Trying to create a button that opens a form panel.

I've created my sub-panel, but when I select "Enable Form" and "Form Panel" in the master screen, it asks me to "select path" and I have no sub-panels listed to choose from.

Where must the sub-panel be located in the heirarchy to show up?

I'd like to use this cheap wifi hue light for my house (KNX installed) to turn on in red when my door garage is open.

I see some work in https://www.domoticz.com/wiki/Yeelight

is there a way to intergrated with bOS?

Dear Support
I got a problem with the Modbus. I need to read and write BOOL value in holding register. I try some settings that is in Jigsaw but it only work as integer, and I realy like that bool style switches that you have made. So please if it is possible please add that to jigsaw or if it possible to do it now can you tell me how? My PLC can only read and write to holding register, it will be changed but for now it is what it is. Thanks.

Hi. We have some IP camera that we use in our company security. I been trying to get it to work over few weeks now and I can not get it to work.
I find the stream that work on VLC it is : rtsp://admin:admin@192.168.11.171:554/h264/ch1/main/av_stream
but in Jigsaw it not showing any picture.
When I try to find it throught Jigsaw ONVIF finder it can not find the camera. PS: ONVIF work on that camera.

Since the last update the lower axis limit of a graph with all my room temperatures is set to 0 instead of the minimum value in the data to plot. This makes the graphs not very interesting anymore since room temperatures are always around 20degC. Is there a way to set the axis limits fixed to chosen values or auto (like in MSExcel) ?

http://robin.nl/products/robin-smartview-sip/

With Confort Click:

With Windows Client I cannot activate the streaming, it only shows the JPEG image. We want MJPEG or RTSP.
In the the Values separator of the IP Camera, the Streaming shows the value FALSE.
How could we activate the Streaming form FALSE to TRUE ?

NOTE: All the URLs were tested with Chrome and VLC and are working fine.

It was tested in 2 phones:

In the first one (ZTE Blade A512, Android 6.0.1):

It is working fine with audio and video when calling from the Door Phone but it is not showing the command button to unlock the door.

I receive the SIP call from the door phone but when I hit the answer button the app is always crashing!

I will add some screenshots.

What could be wrong ?

Thank you

Hello