Enter forum description here ...
0

macbook

Jef Wijns 5 years ago updated by Ricardo Pinto | visiontech pt 5 years ago 1

Is there i software to instal bos client on macbook?

0
Under review

Change date-time format

Doctore Esparta 5 years ago in General updated by Lucas Paz 1 year ago 6

Hi. 

I need to be able to handle the format of the dates but I don't see anywhere how to do it nor do I see something similar in the forum.


I have to get the hour and minute of sunrise and sunset in label format hh:mm but the Sun application returns the value in the format dd/mm/yyyy hh:mm:ss.

Has anyone managed to manage the time formats?


I would appreciate any suggestion.


Thank you

0
Under review

Controller transfer

Noel Fuentes 5 years ago updated 5 years ago 6

Hello everyone,

I don't know how other colleagues do it. When it's needed a Virtual Assistan, what we are doing is change the password temporarily, so the end user can add the devices to the Assistant (after picking their controller from the entire controller list), and then change back the password again.

In order to keep our "admin" account, I think I´d could be nice some kind of account for this "end user" or something so they can add the devices with their own password just for their controller.

Or maybe just add a "Controller transfer" option or something like that. So we can transfer the controller to the end user via e-mail or something.

Hope you're all doing fine and safe.

Best regards,

0

New protocole Velux IO Homecontrol and KLF 200

Gruyère Energie SA 5 years ago in General updated 4 years ago 5

Dear,


In my country the brand Velux for roof window are more used  and at this time bOS not work with this system. 

Velux are developped a solution that is KLF 200 with an api https://www.velux.com/api/klf200

Can this interface be developed in a future update of bOS ?

0
Under review

Unable to add RUN PROGRAM to a scene

Fernando Indopesan 5 years ago in bOS Configurator / Tasks updated by ComfortClick Support 5 years ago 1

Hello! Since the last version (4.7.0) I'm not able to Run a Program from a Scene, I was able in previous versions and it's very useful. I can only set the Enable or Blocked feature, but I can't run it. It'll be pretty helpful, now I have to create a variable just to call the program.

0
Under review

SMA Tripower 10 Modbus communication problem

Josep Gimenez 5 years ago in Devices / Modbus updated by ComfortClick Support 5 years ago 1

Hello, 

I'm trying to connect with a SMA Tripower via Modbus TCP and I can connect with it but when I try to read registers the Tripower response NaN values all the time, I try to change the Slave ID and I try to read diferent adreces but doesn't work, I used the SMA example of the web and I make a new Modbus connection too, can you help me please. Thank you.

0
Under review

Registration of Demo bOS server not responsive

Ross Kopp 5 years ago in bOS Server updated 5 years ago 5

after registering and downloading the bOS server software for windows, i login to the server using the default credentials and try to register the free version for testing. i click on the register button but nothing happens out of a new window opening up. 

is there an issue with registering the free server software version? 

0
Under review

Innogy support with bOS

Ross Kopp 5 years ago in General updated by ComfortClick Support 5 years ago 5

one of my customers have an Innogy Smart home version 2.0 controller and the innogy rolladen controllers. does the bOS have a protocol that interfaces wit hthe Innogy smart home controller?

0

Did anyone have any success with controlling air conditioning or shutters through Google Home?

Tomasz Michalak 5 years ago in bOS Configurator updated by Gruyère Energie SA 5 years ago 7

Did anyone have any success with controlling air conditioning or shutters through Google Home?

shutter?
air conditioning?
gate?

0

Jigsaw - Problems with email, weather, http devices

Ricardo Pinto | visiontech pt 5 years ago in bOS Server updated 5 years ago 3


Hello everyone,

I think probably most of the problems I'm describing here were mentioned in other posts, but it's getting really problematic, and I'm looking forward for you attention:

I'm using Grinder servers on every costumer, but I have a Jigsaw at home, running version 4.6.26, and there's where I'm getting all of these errors / bugs.

My internet service is quite unstable to be honest, and I need to reboot the router quite often. But the electricity is stable, and Jigsaw is operational with almost none reboots. At first, I thought that problem might be from the unstable internet, but now I'm stating to think that the problem may be software based.

The local and remote access to the Jigsaw is ok, and never had any problems with that.

The problem is that I've noticed that I have several services which actually don't work, or just work from time to time. And they are:

SMTP Email sending


My Jigsaw doesn't send any emails... Gmail, own mail server, nothing works. Today I've tested exactly the same SMTP configuration on my local laptop bOS server, and it works. But not on the Jigsaw. It doesn't show any error, it just doesn't do anything.

Reload and reboot doesn't solve anything.

I think I probably just seen my Jigsaw sending 1 successful email, and that was kind of several weeks ago.

Weather service


My weather service also doesn't work. Most of the times I see an empty error image of the weather on the visualization. On the weather node, if I add my City name on the location name, it disappears.

Image 2479

Image 2480



HTTP Devices


Simple stuff like making an HttpRequest on a Task or Http Device, without any authentication, doesn't work.


Example of a HttpRequest not working:

https://api.thingspeak.com/update?api_key=xxxxxxxxxx&field1=100

Resuming:


Reboot, Reload, Factory Reset, none of this actually helped at first.

With a fresh Jigsaw factory reset, I had the same problems.

Then, after a configuration restore, my email started to work. And apparently weather too. The question is, for how long. Because it happened before.

Is there something wrong on Jigsaw code? Isn't bOS sharing the same code that on Grinder? I assume that the software is developed in .NET and using Mono on Jigsaw or something.

The question here is, am I the only one with problems? If not, has anyone noticed this issues? Or am I being too picky?

My configuration is not that complex. It's true that I do a lot of testing, and complex logic, etc, but the configuration and visualization is pretty "light" actually, so I know I'm not pushing too hard the Jigsaw.

Best regards