Enter forum description here ...
0

Basic device and ASCII command

Andy Gill 9 years ago in bOS Configurator / Devices updated 9 years ago 2

Hi There,

I'm trying to send an ASCII command to a device via RS232, the command is "T002:1" (Toggle address 2 relay 1) and the device it's controlling requires a carriage return to complete the command,which I believe in the bos setting needs to be in hex in the "new line" field so I'm using "0x0d", the documents for the device say to end with "/r"

I'm getting a Basic devices Error in the error log with no description,I can send the command from the command line using echo, but there is no response on the device from BOS?


Any pointers would be gratefully received.


Thanks

0
Answered

DSC Alarm Partition

Henrique Branco 9 years ago in Devices / DSC updated by ComfortClick Support 9 years ago 3

Hi there,

it is possible to make the control of additional partitions ?
By default, we have the away mode partition, armed in stay mode and disarmed.
In central DSC, a new partition "night mode" as been configured, how can I control via confortClick ?

Regards

Answer
ComfortClick Support 9 years ago

Hello,

you can add another partition under DSC node, select partition number and drag and drop it in your visualization theme.

Second option is to use "Virtual keypad". You can enable virtual keypad under main DSC node (Virtual Keypad). Before you enable virtual keypad, your DSC alarm must be connected to bOS and you need to change baud rate to at least 19200.
To add virtual keypad to your theme drag and drop main DSC node in your theme and select virtual keypad. Virtual keypad acts like normal DSC keypad so you need to assign partition or set the keypad as global.


Regards

0
Answered

Internet Traffic

rasoul rayat 9 years ago in bOS Client updated by ComfortClick Support 9 years ago 1

Hi

Is there any way to load and save software Themes primary data such tabs , background picture ,etc. in Bos client ?

i think with every log in to Bos client or changing tabs in Theme the client reload all data from server again and it possible cause high Internet traffic in remote use.

regards

0

latest problem, license...

Andy Gill 9 years ago in bOS Server updated 9 years ago 4

Hello Jure,


I'm now unable to use anything as my server has decided it's not registered, when I then try and register It tells me the machine is already registered?

Could you assist urgently as this has left me without control of a number of things.



0
Planned

bos phone for IOS

luca di giorgio 9 years ago updated by ComfortClick Support 9 years ago 1

hallo

I'm using a sip phone program running on iOS.

I've seen your bos phone but it is available only for android device.

Have you planned another release for iPhone ?


regards


0
Under review

Using white only Hue lamps

Andy Gill 9 years ago in Devices / HUE updated 9 years ago 2

Hi There,


I'm using white only dimming Hue lamps I can't see away of configuring this in BOS, although I can dim the Lamp it's giving the options for all the colours which confuses the user?

Can I have a simple dimmer and on/off control?


Cheers


Andy

0
Answered

Lutron lighting integration

Pavel Kulko 9 years ago updated by ComfortClick Support 9 years ago 3

I have Lutron - Homeworks 4 series controller for the lighting in my house. It is possible to connect to it and control lights remotely using their smartphone application. The connection protocol which is used in the smartphone application is called HW Illumination. Is it possible to connect to from bOS using one of your supported protocols?

Answer
ComfortClick Support 9 years ago

Hello,you could try with our Basic driver via Serial or TCP/UDP, but for now our Basic driver supports only one way communication so you wont be able to get status of the devices, but you will be able to control them.

0
Answered

Setup - HSM02 - Wireless Mini Door/Window Contact Detector

Andy Gill 9 years ago in Devices / Z-Wave updated by ComfortClick Support 8 years ago 3

Hi Gents,


Anyone had any experience with this:

HSM02 - Wireless Mini Door/Window Contact Detector

Can not include it on my network, following the instructions (as far as I can understand them) it says take the battery lid off and move magnet away and it should be in inclusion mode, which it seems to be but i'm getting nothing from my Zwave dongle?


Any help would be greatly appreciated.


Cheers

0
Under review

itv2 interface

luca di giorgio 9 years ago in Devices / DSC updated by anonymous 8 years ago 2

hallo.

i've an alarm station (BENTEL ABSOLUTE 42 ) i'll like to interface with boss.

The station has an ip module and i can switch on and off areas, alarm and have access to log and events using their app ( absolute app for iOS or android).

i receive mail notifications and phone calls from events .

Bentel support told me that the common interface for their products is ITV2 protocol.


is there something for connecting with boss?

thanks

ragards


0

VIERA IP Control

Jamel Nacef 9 years ago in Devices / Other updated by anonymous 7 years ago 0

This is what I'm trying to achieve:


I successfully can control my TV from Firefox POST plugin with following URL, Headers and payload:

POST URL: http://192.168.155.105:55000/nrc/control_0/

HEADERS:

Accept: text/xml
Cache-Control: no-cache
Pragma: no-cache
SOAPACTION: "urn:panasonic-com:service:p00NetworkControl:1#X_SendKey"
Content-Length: 324

Content-Type: text/xml;charset="utf-8"


PAYLOAD (data):

<?xml version="1.0" encoding="utf-8"?>
<s:Body>
<u:X_SendKey xmlns:u="urn:panasonic-com:service:p00NetworkControl:1">
<X_KeyEvent>NRC_MUTE-ONOFF</X_KeyEvent>
</u:X_SendKey>
</s:Body>
</s:Envelope>


I'm able to MUTE and UNMUTE my TV, and I have also tested following commands which also works:


"NRC_CH_DOWN-ONOFF", // channel down
"NRC_CH_UP-ONOFF", // channel up
"NRC_VOLUP-ONOFF", // volume up
"NRC_VOLDOWN-ONOFF", // volume down
"NRC_MUTE-ONOFF", // mute
"NRC_TV-ONOFF", // TV
"NRC_CHG_INPUT-ONOFF", // AV,
"NRC_RED-ONOFF", // red
"NRC_GREEN-ONOFF", // green
"NRC_YELLOW-ONOFF", // yellow
"NRC_BLUE-ONOFF", // blue
"NRC_VTOOLS-ONOFF", // VIERA tools
"NRC_CANCEL-ONOFF", // Cancel / Exit
"NRC_SUBMENU-ONOFF", // Option
"NRC_RETURN-ONOFF", // Return
"NRC_ENTER-ONOFF", // Control Center click / enter
"NRC_RIGHT-ONOFF", // Control RIGHT
"NRC_LEFT-ONOFF", // Control LEFT
"NRC_UP-ONOFF", // Control UP
"NRC_DOWN-ONOFF", // Control DOWN
"NRC_3D-ONOFF", // 3D button
"NRC_SD_CARD-ONOFF", // SD-card
"NRC_DISP_MODE-ONOFF", // Display mode / Aspect ratio
"NRC_MENU-ONOFF", // Menu
"NRC_INTERNET-ONOFF", // VIERA connect
"NRC_VIERA_LINK-ONOFF", // VIERA link
"NRC_EPG-ONOFF", // Guide / EPG
"NRC_TEXT-ONOFF", // Text / TTV
"NRC_STTL-ONOFF", // STTL / Subtitles
"NRC_INFO-ONOFF", // info
"NRC_INDEX-ONOFF", // TTV index
"NRC_HOLD-ONOFF", // TTV hold / image freeze
"NRC_R_TUNE-ONOFF", // Last view
"NRC_POWER-ONOFF", // Power off

"NRC_D1-ONOFF",

"NRC_D2-ONOFF",

"NRC_D3-ONOFF",

"NRC_D4-ONOFF",

"NRC_D5-ONOFF",
"NRC_D6-ONOFF",

"NRC_D7-ONOFF",

"NRC_D8-ONOFF",

"NRC_D9-ONOFF",

"NRC_D0-ONOFF",



Now to my question, how to format this in bOS?


I have created a Basic HTTP device:

Image 142


And created one command as follows:

Image 143

Image 144


When try to call this command I get this error message in the log:


Error running Send.. Exception has been thrown by the target of an invocation.. BOSCommon.Exceptions.NodeException: Exception of type BOSCommon.Exceptions.NodeException was thrown.

at ComfortClick.Basic.BasicHttp.SendCommand(Object message, Object stateNode, Object stateValue)
at ComfortClick.Basic.Commands.HttpCommand.Send(). at System.RuntimeMethodHandle.InvokeMethod(Object target, Object arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object parameters, Object arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
at BOSCommon.Data.NodeHost.CallFunction(String functionName, Object arguments).


What is wrong?