Hikvision Alarm Panel protocols.jpg

Hello everyone,

I have an HikVision alarm system wich are using SIA-DCS protocol, how can I integrate on JigSaw & bOS Config?

Thank you

Nelu

does anybody have any experience using webhooks on the jigsaw pro?

I want to integrate my unify G4 doorbell's fingerprintscanner, to open my door, and i have a jigsaw running my KNX.

If i can get the G4 to communicate with my KNX, i could make it happen

Fibaro radiator thermostat error message Devices : No response to Battery.

Every hour for each valve.

It is set to: Enable polling

It transmits the battery charge value at the set interval with polling.

But why does it put a No response to Battery error in the LOG?

Hi,

Already installed Jigsaw CC-JS-2  bought in 2022.
We already install Configurator, but after change passw the device is not discoverable on WiFi.
We are trying to Restore Factory Settings took 30s push the reset button, nothing happened.

On IPScanner not appear anymore
Please let me know what we can do? Can you connect on remote to fix the issue?

KNX disconnect two times a minute. Any ideas what could be wrong ? 5 years was no problem, with last update 4.11.8 problem started.

hello, the doorbel G4 pro has finally received the update so the fingerprint is active.

I want the fingerprint to give a command to my KNX system, opening the door. Had anyone already found a way to webhook it to the bOS?

Hello. Any ideas how can i read a UCHAR data type in configurator? I have a ventilation system with 0-Stop , 1- Economy, 2- Comfort, but i don't understand how to convert the value in configurator.

When is on, the value is 512, but i don't know from where that come. Thank you!

Hello all. After I upgraid my Zigsaw server it is proposed to me to reinstall configurator and client. But new configurator and client didn`t launch. Please help me.

Hi everyone,

I have some strange behaviour of my vizualization. Over last months I have set up my vizu and it was working now for couple of months without any issues. Now, I am on my first my first vacation abroad since i have it ready and of course from time to time I am checking the situation of my house in my vizu. Mostly because I can rather than I need to 😉

Anyway, today on my third day of vacation all of a sudden I receive non-stop error messages when I am entering the vizu...first time that this happens and of course exactly then when I am not home.

The message is: Error connecting to device. Write: negative confirmation received from telegram. I also attach a screenshot. And directly after such a message it says that it is again connected.

I could also wait until I am back home from vacation to restart wlan/server etc, but I hope the one or the other might understand me that this keeps me restless that I cant access it right now. I have simply no idea why I get this messages non stop and also I can not click any buttons or similar. I did not change anything since I left home, which makes me think that it somehow connected to my internet router at home. The strange thing however is that I still receive data concerning temperature, brightness level etc. Also I still get video connection from my IPC cameras that are connected to the same network as my jigsaw server.

Does anyone have an idea whats going on? Maybe I need to restart my jigsaw server?

Would appreciate any thoughts/ideas on that issue.

Cheers, Robert

Hello,

I am trying to set the AC to turn off if the read temperature is equal to the set temperature. Do I have to use the thermostat task? and should I set the type? Thank you.