Is it possible to obtain clarity via the web weather forecast? Or when it is dark outside?

With best regards

I would like increment value until the knx switch are pressed. 

I think use the program fonction but I dont' know how to create a quick while loop ?

Hello. I facing issue with freezing bos client on Iphone 8. I try another devices and it works great. It freeze on specific page but no other device have this issue.

^{Hi
After ugrading to the new version of bOS, my scenes containing HUEs are not getting recogniczed any more.
What do I need to configure in a sceene to make the sceene recognize that the room setting are according to the sceene?
In the previous version, The color values of the light was enough for a scene to be recongnized.
I have tried with most combinations of  HUE.Power with HUE.Brightness, HUE. Color Temperature and HUE.Color with little success. The scene's State does not seem to be set consistently. 
Is there an explanation of how to use Scenes with HUEs after version 4.4.4?}

I'm trying to connect a Paradox security system to a CC Grinder, through a Paradox PRT3 module USB (COM3), and I'm getting a "Error connecting to device - No Ack" message" 10 seconds after connection, keeps trying to connect.

Can't figure if its a Windows problem (tried several configurations for flow control on port settings), Paradox configuration (Serial Port ON, Automation ON, ASCII Protocol, 9600br) or CC.

Any ideas?

Hola buenos días, WrongID indica mi licencia. Corresponde a una licencia gratuita por equipo, ¿por qué sucede esto? Actualizo y continúo con el mismo error. ¿Podrías dar una solución? Gracias

Dear all,

I'm trying to add Aeotec Trisensor to my Z Wave network but the device is not visible in bOS Configurator.

The sensor is paired with my Aeotec Stick Gen 5 but un-visible in the Comfortclick.

Any idea on how to fix it?

Hello,

I am having an issue when bOS Launch. 

It always automatically open/close my curtain, as well as play my music right after bOS Running. This is annoying.

Do you know how to disable this function.

Thank for your help

Hi everyone.

I need help from you guys. 

As anyone had the need to do a math calculation in the last second of each month? 

My idea is to present the client with the difference between this month energy consumption comparing to the last month. 

The math is easy, my problem is with the trigger, because we have months with 29 or 30 or 31 days.
So I need to do the calculation ( Double = Thismonthcount - Previousmonthcount ) in the last second of each month. 

Thanks for the help.

After update to 4.6.24 I'm unable to get RPC working. I have tried the "new place" of enabling RPC and also the old settings.txt but no RPC is bound. Checking with ex. netstat port 81 is not bound,