I have a little problem integrating Shelly through the tcp server

Shelly integration is in your libraries https://www.comfortclick.com/BOS/Library/Devices/115

Everything works fine except the listener.

The listener is configured as a tcp server, accepts connections but does not respond and does not close the session which causes Shelly to hang.

Shelly expects any response from the host or session closure.

I did the tests using https://docs.microsoft.com/pl-pl/dotnet/api/system.net.sockets.tcplistener?view=net-6.0

If the listener answers the call from Shelly or closes the session, everything works fine.

Conversely, when the host accepts the call and nothing returns or closes the session, Shelly stops sending calls to the host and suspends Shelly until a reset. Shelly appears to be waiting for any information from the host, without it being able to complete the routine.

In the code from the MS website from lines 45 to 63 there is a procedure that sends back to the client what the client sent, while on line 64 the connection is closed.

Removing these lines causes the problem and probably simulates comfortclicka operation.

Is there any call that will get a reply from comfortclick's website eg http://192.168.1.10/comfortclickreply?par=1?

Alternatively, you could add a checkbox as an option - "Send this message as confirmation:", "message" ?

checked on bOS v4.9.8 and Shelly 1 with fw 20220209-092750 / v1.11.8-g8c7bb8d

Hi everyone,

i have a jigsaw connected to a Modbus interface module MIM-B19N Samsung. I have the next parameters:

I attach the datasheet of this module to compare if you need:  Manual Interface MODBUS Maquinas clima Samsung.pdf

The question is that some times, randomly, the communication breaks down and we can control any of indoor units we have. In addition, i attach a screenshot of Jigsaw's logs:

I don't know if the problem is because of driver's parameters or firmware error. I will appreciate any help .

Thanks

I'm using the LG TV Device in CC on a 2021 LG TV (webOS 6). There doesn't seem to be a Power On / Off function. From what I gather the TV is disconnected from the network when powered off (via remote - standby? I would have thought standby would have kept connection with the router). Is there a way around this? i.e. through TV settings? As it's pretty annoying telling a client that they have to power up the TV via remote first before automations will start.

Love to know what people have done in this space, I really don't want to add a IR sprayer to the mix just to turn off and on.

Cheers

Hello everyone.

Unfortunately I have clients that due to server hardware reasons cannot upgrade beyond version 4.8.20. For this I have to use older configurators every time I need to make a change in these servers.

The problem I have is that when I give the Access ID corresponding to this server, the application does not resolve it and returns the Access ID not found message.

However when using versions later than 4.8.20 I have no problem creating the connection.

I also have no problems with the App Client.

Has access to older versions been restricted to the way of creating connections with the Access ID as it has been done until now?

Hi

I need to provide Smart TV options for clients. From what I understand the Samsung (new models <6 years) aren't supported and I can see there's an LG on the device list but not sure if there are also limitations on LG Models

So before making recommendations I'd like to be 100% confident which TVs and Models will work and what if any limitations there may be.

Thanks 

Hello, does anyone made integration to Shelly 2.5 device? 

Comfortclick published a Shelly integration but its only for 1 switch 1L and not for 2 switches.

thanks

Good day everyone.

While working on the new project, I remembered about another serious editing problem in bOS Configurator. It appears in any edited program. The problem concerns edition of schedulers, which contain dozen commands (in my case 12) and dozen time events (in my program 18).

I do each new scheduler by cloning an existing one, according to the screenshot:

The configurator freezes while editing commands:

2022.05.27_bOS Configurator crashes.mp4

To force the configurator to close, it was enough to edit 8 commands. In my case, the configurator crashes with each new schedule (on average, after editing dozen commands).

To reproduce the problem, you can use the configuration file that I sent by e-mail two days ago (my earlier post "bOS Configurator - cyclical configuration downloading").

Regards,

Grzegorz

hi, i would like to know if you have any plans on integrating coolmaster devices to comfortclick

is a great solution for integrating HVAC systems

https://coolautomation.com/

Hello everyone.

I need to track through the registry to discriminate a problem in my customer's installation. The Log Monitor has a data collection buffer of approximately 12 hours, but 95% of the events it displays are weather and clock events.

Is there a way to disable the General\Time and General\Sun events in the Log Monitor so that they do not occupy most of the space in the log and lengthen the time I can spend without having to collect the data from the log before it is deleted?

Thank you

Hello,
I have added a third stream to my CC today. Since then I get the error message that there is not enough memory. This must be some kind of error since it can't be the memory with only three streams.

Has anyone else had this?
What can I do?