1. ComfortClick
  2. bOS Configurator
  3. Tasks
  4. Questions
0
Answered

Counterlog or calculation only activated based on given input

Fabien Fuster 7 years ago in bOS Configurator / Tasks • updated by ComfortClick Support 7 years ago • 9

Hello,


I'm looking on a way to calculate cost of energy properly.


In fact, the energy counter is sending a code about the actual energy cost profile. My goal is to get the cost calculated properly based on the current activated profile and change the cost rate accordingly.

So far, I did find a way to get the calculation only activated when the given cost code is set, or enable/disable the recording in a corresponding counterlog.


ie example :


code 1 is for high cost rate, code 2 for low cost rate.

high cost rate calculation should only apply (or be recorded) during the time period code 1 is send on the knx network and toggle to low cost rate calculation when given knx message toggles.


Any idea how to set this up ?


Regards,

Under review
ComfortClick Support 7 years ago

Hello,


can you read only total energy or can you also read other objects like power, separate energy on low/high tariff?


Regards.

Fabien Fuster 7 years ago

Hello,


I only have the total energy info and actual tariff info coming out of the module. therefore I was wondering how to setup the calculation and recording, in order to display the costs info.


Thanks,

+1
ComfortClick Support 7 years ago

Hello,


we made an example which will resolve your problem regarding the high/low consumption. Simply download it and Import it to your configuration, link the correct addresses and it should work as you asked. All tasks and variables are named accordingly and should be easy to read. Feel free to ask any follow up questions.


If you will have any problems similar to this, please use our support ticket:


  1. Login to your account on our web page http://www.comfortclick.com/ (or create an account if you don't have one).
  2. Click on your User name (upper right corner) and select Support Tickets from the drop down menu.
  3. Create a New Ticket
We'll get back to you in the shortest possible time.

Regards


Cost_log.bos

Fabien Fuster 7 years ago

Thanks. Will use the ticketing system in the futur.


Whouaw... I would never have done someting like that ! Thanks for your help.

However, it is clear and obvious for the tariff and tariff profile input, but can you please confirm that only the "total energy" is to be linked to current energy (value in kWh) on top ? Nothing more?


Thanks again,

ComfortClick Support 7 years ago

The current energy displays your current energy consumption, which is then calculated in either low or high cost to get the correct currency or price. How would you like to link the current energy?


Regards.

Fabien Fuster 7 years ago

OK, so I missed something here...


I linked the tarif selection input and corrected high and low price. However, to get it working I need to link somehow the total energy information given by the knx module to your calculation. I was looking to the various content of your file and guessed I need to link this information output to your "current energy" double variable. Am I wrong ?


Regards,


ComfortClick Support 7 years ago

Yes, total energy information given by the knx module should be linked to our "current energy" in order to get the correct values.


Regards.

Fabien Fuster 7 years ago

OK, done and working perfeclty well !


Thanks a lot for your support. Can be set to answered.

Answered
ComfortClick Support 7 years ago

Good to hear everything is working :)


Best regards.

Customer support service by UserEcho