If Virtual Keypad option is set to True, DSC virtual keypad is activated. It acts like a real physical keypad with the same functionality including programing of the DSC system.
NOTE: Baud rate should be set to at least 19200, when using virtual keypad. Before changing the baud rate make sure that DSC node value Connected is set to True.
Virtual keypad for DSC alarm can be added to frame by dragging the main DSC node to the theme. Using the keypad, the alarm can be used on any device or platform.
If the DSC alarm supports and has emergency calls enabled clients can also use the emergency call buttons to notify the police, fire department and hospital.
Customer support service by UserEcho