KNX Group addresses
Address setting is the group address. Both three-level group addresses (e.g. 0/0/0) and free group addresses are supported (e.g. 755).
Status Address is used for receiving object values. If Status Address is set, values received on Address are ignored. Multiple status addresses can be entered, separated by commas.
Value Type sets the type of the group address (type, unit, image). This setting can be configured manually for each group address, or configured when importing from ETS using our import wizard.
Communication flags and cyclical sending can be used for each data point. Multiple actions can be set when the device is connected (read or write to address).
Customer support service by UserEcho