Movement detector settings

Movement Detector is used for operating lighting based on user movement.

Input value is linked to our movement detector (could be any movement sensor). 

Output Value must be linked to the device being controlled by the movement (e.g. the controlled lamp). 

Blocked By Output can be used to block the operation of the movement detector, when the Output Value is not changed by movement detector (e.g. changed by KNX push button, which turns the lamp ON and OFF).

When movement detector is blocked it will not start the delay timeout and the Output Value will never turn off. Alternatively Blocking Value is linked to custom object can be used to block the operation of the movement detector, which means that as long as blocking is True, the light will not turn on if movement is detected.