SATEL stands for high-quality electronic alarm system devices. The product range includes control panels, sirens, detectors, monitoring stations, radio controllers and switching mode power supplies.
bOS Satel device supports the ETHM-1 Plus interface.
To establish a connection to the Satel alarm system you first need to find and enter the IP address. The port is set to 7094 by default and should be left as it is.
Before creating the bOS configuration, the Satel system should be programmed according to the manufacturer's instructions. Password must be entered, because it is required for most functions(Arm, Disarm, etc.) available under the Functions tab. The Satel node contains two sub nodes(Partitions and Zones) which act as folders for partitions and zones.
Customer support service by UserEcho